IU2RPR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU2RPR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*	Volt Aux*	Ampere Aux*
1776684081	4 Pkt/10m	0 Pkt/10m	3.96 Volt	4 Volt	-0.07 Ampere
1776682280	7 Pkt/10m	0 Pkt/10m	3.98 Volt	4 Volt	-0.07 Ampere
1776680479	6 Pkt/10m	0 Pkt/10m	3.98 Volt	4 Volt	-0.07 Ampere
1776678678	4 Pkt/10m	0 Pkt/10m	3.98 Volt	4 Volt	-0.07 Ampere
1776676876	6 Pkt/10m	0 Pkt/10m	3.98 Volt	4 Volt	-0.07 Ampere
1776675075	5 Pkt/10m	0 Pkt/10m	3.98 Volt	4 Volt	-0.08 Ampere
1776673274	10 Pkt/10m	0 Pkt/10m	3.98 Volt	4 Volt	-0.08 Ampere
1776671473	7 Pkt/10m	0 Pkt/10m	4.02 Volt	4.1 Volt	0.04 Ampere
1776669672	7 Pkt/10m	0 Pkt/10m	3.9 Volt	4 Volt	-0.14 Ampere
1776667871	13 Pkt/10m	0 Pkt/10m	3.98 Volt	4 Volt	-0.07 Ampere
1776666069	4 Pkt/10m	0 Pkt/10m	3.92 Volt	4 Volt	-0.15 Ampere
1776664268	13 Pkt/10m	0 Pkt/10m	4.04 Volt	4.1 Volt	0.06 Ampere
1776662466	8 Pkt/10m	0 Pkt/10m	4.08 Volt	4.1 Volt	0.12 Ampere
1776660666	7 Pkt/10m	0 Pkt/10m	3.96 Volt	4 Volt	-0.06 Ampere
1776658864	6 Pkt/10m	0 Pkt/10m	3.88 Volt	3.9 Volt	-0.14 Ampere
1776657063	5 Pkt/10m	0 Pkt/10m	3.96 Volt	4 Volt	-0.04 Ampere
1776655262	5 Pkt/10m	0 Pkt/10m	3.98 Volt	4 Volt	-0.04 Ampere
1776653460	4 Pkt/10m	0 Pkt/10m	3.9 Volt	4 Volt	-0.11 Ampere
1776651659	6 Pkt/10m	0 Pkt/10m	3.92 Volt	4 Volt	-0.12 Ampere
1776649858	11 Pkt/10m	0 Pkt/10m	3.96 Volt	4 Volt	-0.07 Ampere
1776648057	5 Pkt/10m	0 Pkt/10m	3.98 Volt	4 Volt	-0.06 Ampere
1776646256	12 Pkt/10m	0 Pkt/10m	4.04 Volt	4.1 Volt	0.06 Ampere
1776644454	8 Pkt/10m	0 Pkt/10m	3.96 Volt	4 Volt	-0.07 Ampere
1776642653	10 Pkt/10m	0 Pkt/10m	4.08 Volt	4.1 Volt	0.12 Ampere
1776640852	5 Pkt/10m	0 Pkt/10m	4.02 Volt	4.1 Volt	0.06 Ampere

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)