OE6POD-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE6POD-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1772638620	946 hPa	14.6 C deg	1025.2 hPa	0 C deg
1772636805	945.9 hPa	20 C deg	1023.6 hPa	0 C deg
1772633189	946.2 hPa	15.6 C deg	1025.1 hPa	0 C deg
1772631366	946.2 hPa	16 C deg	1025.1 hPa	0 C deg
1772627731	946.4 hPa	17 C deg	1025 hPa	0 C deg
1772624098	946.8 hPa	22.7 C deg	1023.9 hPa	0 C deg
1772622283	947.3 hPa	22.2 C deg	1024.5 hPa	0 C deg
1772620473	947.7 hPa	21.6 C deg	1025.1 hPa	0 C deg
1772618672	947.8 hPa	23.8 C deg	1024.7 hPa	0 C deg
1772616835	948.1 hPa	23.5 C deg	1025.1 hPa	0 C deg
1772615019	948.3 hPa	25.4 C deg	1024.8 hPa	0 C deg
1772613204	948.6 hPa	26.9 C deg	1024.6 hPa	0 C deg
1772611390	948.8 hPa	23.4 C deg	1025.9 hPa	0 C deg
1772609575	948.6 hPa	14.7 C deg	1028 hPa	0 C deg
1772607759	948.5 hPa	7.6 C deg	1030 hPa	0 C deg
1772605944	948.4 hPa	3.4 C deg	1031.2 hPa	0 C deg
1772549626	946.6 hPa	17.2 C deg	1025.1 hPa	0 C deg
1772545993	946.5 hPa	20 C deg	1024.2 hPa	0 C deg
1772542363	946.7 hPa	23.7 C deg	1023.5 hPa	0 C deg
1772540554	946.9 hPa	22.7 C deg	1024 hPa	0 C deg
1772538730	947.1 hPa	19.5 C deg	1025.1 hPa	0 C deg
1772535100	947.7 hPa	22 C deg	1025.1 hPa	0 C deg
1772533289	948 hPa	24.2 C deg	1024.7 hPa	0 C deg
1772529651	948.2 hPa	23.6 C deg	1025.2 hPa	0 C deg
1772527836	948.3 hPa	25.3 C deg	1024.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)