SP5KAB-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP5KAB-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1772428482	0.2 Rx Erlang	0.01 Tx Erlang	193 count/10m	10 count/10m	6 count/10m
1772427282	0.19 Rx Erlang	0.01 Tx Erlang	166 count/10m	9 count/10m	5 count/10m
1772426081	0.15 Rx Erlang	0.01 Tx Erlang	134 count/10m	7 count/10m	4 count/10m
1772424882	0.16 Rx Erlang	0 Tx Erlang	153 count/10m	9 count/10m	3 count/10m
1772423681	0.14 Rx Erlang	0.01 Tx Erlang	132 count/10m	7 count/10m	6 count/10m
1772422482	0.14 Rx Erlang	0.01 Tx Erlang	129 count/10m	8 count/10m	5 count/10m
1772421282	0.15 Rx Erlang	0.01 Tx Erlang	139 count/10m	8 count/10m	5 count/10m
1772420081	0.14 Rx Erlang	0.01 Tx Erlang	136 count/10m	7 count/10m	5 count/10m
1772418881	0.15 Rx Erlang	0.01 Tx Erlang	132 count/10m	7 count/10m	5 count/10m
1772417682	0.15 Rx Erlang	0.01 Tx Erlang	127 count/10m	9 count/10m	5 count/10m
1772416482	0.13 Rx Erlang	0.01 Tx Erlang	117 count/10m	7 count/10m	4 count/10m
1772415282	0.15 Rx Erlang	0.01 Tx Erlang	132 count/10m	7 count/10m	5 count/10m
1772414082	0.13 Rx Erlang	0.01 Tx Erlang	124 count/10m	10 count/10m	4 count/10m
1772412881	0.12 Rx Erlang	0.01 Tx Erlang	108 count/10m	7 count/10m	5 count/10m
1772410481	0.16 Rx Erlang	0.01 Tx Erlang	132 count/10m	7 count/10m	5 count/10m
1772409281	0.13 Rx Erlang	0.01 Tx Erlang	121 count/10m	11 count/10m	4 count/10m
1772408081	0.13 Rx Erlang	0.01 Tx Erlang	125 count/10m	6 count/10m	4 count/10m
1772406882	0.13 Rx Erlang	0.01 Tx Erlang	128 count/10m	10 count/10m	4 count/10m
1772405682	0.13 Rx Erlang	0.01 Tx Erlang	120 count/10m	7 count/10m	5 count/10m
1772404481	0.14 Rx Erlang	0 Tx Erlang	124 count/10m	7 count/10m	2 count/10m
1772403281	0.13 Rx Erlang	0.01 Tx Erlang	117 count/10m	9 count/10m	6 count/10m
1772402081	0.13 Rx Erlang	0.01 Tx Erlang	120 count/10m	8 count/10m	4 count/10m
1772400882	0.13 Rx Erlang	0.01 Tx Erlang	118 count/10m	8 count/10m	7 count/10m
1772399682	0.13 Rx Erlang	0.01 Tx Erlang	118 count/10m	6 count/10m	9 count/10m
1772398510	0.12 Rx Erlang	0.01 Tx Erlang	116 count/10m	5 count/10m	4 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)