This is the latest recevied telemetry packets stored in our database for station/object HP1PCR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Vin*
Rx1h*
Dg1h*
Eff1h*
A5*
1761733647
14.03 Volt
40 Pkt
10 Pkt
83 Pcnt
0 None
1761623383
14.03 Volt
60 Pkt
10 Pkt
77 Pcnt
0 None
1761550595
14.03 Volt
60 Pkt
10 Pkt
73 Pcnt
0 None
1761549154
14.03 Volt
80 Pkt
20 Pkt
75 Pcnt
0 None
1761533299
14.03 Volt
80 Pkt
20 Pkt
80 Pcnt
0 None
1761531137
14.03 Volt
60 Pkt
20 Pkt
81 Pcnt
0 None
1761530416
14.03 Volt
50 Pkt
10 Pkt
80 Pcnt
0 None
1761446818
14.03 Volt
30 Pkt
10 Pkt
79 Pcnt
0 None
1761162872
14.03 Volt
90 Pkt
20 Pkt
74 Pcnt
0 None
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)