ON0ABT-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0ABT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1773061729	14.48 Volt	440 Pkt	120 Pkt	91 Pcnt
1773061129	14.48 Volt	430 Pkt	120 Pkt	93 Pcnt
1773060526	14.48 Volt	430 Pkt	130 Pkt	93 Pcnt
1773059927	14.48 Volt	470 Pkt	140 Pkt	93 Pcnt
1773059328	14.48 Volt	510 Pkt	150 Pkt	93 Pcnt
1773058726	14.48 Volt	580 Pkt	160 Pkt	93 Pcnt
1773058126	14.48 Volt	630 Pkt	170 Pkt	92 Pcnt
1773057522	14.48 Volt	660 Pkt	180 Pkt	90 Pcnt
1773056924	14.48 Volt	700 Pkt	180 Pkt	88 Pcnt
1773056321	14.48 Volt	710 Pkt	180 Pkt	87 Pcnt
1773055722	14.48 Volt	700 Pkt	170 Pkt	85 Pcnt
1773055122	14.48 Volt	680 Pkt	170 Pkt	83 Pcnt
1773054519	14.48 Volt	700 Pkt	180 Pkt	81 Pcnt
1773053920	14.48 Volt	770 Pkt	200 Pkt	81 Pcnt
1773053321	14.48 Volt	800 Pkt	210 Pkt	81 Pcnt
1773052721	14.48 Volt	800 Pkt	220 Pkt	80 Pcnt
1773052120	14.48 Volt	840 Pkt	230 Pkt	80 Pcnt
1773051523	14.48 Volt	890 Pkt	250 Pkt	80 Pcnt
1773050923	14.48 Volt	920 Pkt	260 Pkt	78 Pcnt
1773050325	14.48 Volt	910 Pkt	250 Pkt	77 Pcnt
1773049722	14.48 Volt	920 Pkt	250 Pkt	78 Pcnt
1773049117	14.48 Volt	950 Pkt	250 Pkt	80 Pcnt
1773048514	14.48 Volt	930 Pkt	250 Pkt	79 Pcnt
1773047914	14.48 Volt	880 Pkt	230 Pkt	78 Pcnt
1773047313	14.48 Volt	830 Pkt	210 Pkt	80 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

None: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)