DB0PSW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0PSW. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788710732	15.6 Volt	60 Pkt	20 Pkt	81 Pcnt
1788710132	15.6 Volt	60 Pkt	20 Pkt	80 Pcnt
1788709532	15.53 Volt	50 Pkt	20 Pkt	79 Pcnt
1788708932	15.6 Volt	50 Pkt	20 Pkt	84 Pcnt
1788708332	15.53 Volt	40 Pkt	20 Pkt	89 Pcnt
1788707732	15.53 Volt	40 Pkt	10 Pkt	93 Pcnt
1788707132	15.53 Volt	50 Pkt	10 Pkt	98 Pcnt
1788706532	15.53 Volt	60 Pkt	10 Pkt	100 Pcnt
1788705932	15.6 Volt	70 Pkt	10 Pkt	100 Pcnt
1788705332	15.53 Volt	60 Pkt	10 Pkt	100 Pcnt
1788704732	15.6 Volt	60 Pkt	10 Pkt	100 Pcnt
1788704132	15.53 Volt	70 Pkt	10 Pkt	97 Pcnt
1788703532	15.6 Volt	60 Pkt	10 Pkt	95 Pcnt
1788702932	15.6 Volt	50 Pkt	10 Pkt	95 Pcnt
1788702332	15.6 Volt	50 Pkt	10 Pkt	95 Pcnt
1788701732	15.53 Volt	50 Pkt	10 Pkt	94 Pcnt
1788701132	15.53 Volt	60 Pkt	10 Pkt	94 Pcnt
1788700532	15.6 Volt	60 Pkt	10 Pkt	97 Pcnt
1788699932	15.6 Volt	60 Pkt	10 Pkt	98 Pcnt
1788699333	15.53 Volt	60 Pkt	10 Pkt	97 Pcnt
1788698732	15.53 Volt	60 Pkt	10 Pkt	97 Pcnt
1788698132	15.6 Volt	70 Pkt	10 Pkt	95 Pcnt
1788697532	15.6 Volt	60 Pkt	10 Pkt	97 Pcnt
1788696932	15.53 Volt	70 Pkt	10 Pkt	91 Pcnt
1788696332	15.53 Volt	80 Pkt	10 Pkt	92 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)