DF1NRR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF1NRR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Temp*	Humi*	Baro*
1750770334	28.2 deg C	50.8 %	1018.5 hPa
1750768582	31.2 deg C	44.5 %	1014.5 hPa
1750767633	32 deg C	43.1 %	1016.6 hPa
1750766733	30.9 deg C	44.4 %	1012.8 hPa
1750764933	28 deg C	52.6 %	1013.2 hPa
1750764033	27.6 deg C	53.3 %	1012.4 hPa
1750763133	27.6 deg C	53.4 %	1017.8 hPa
1750762233	27.6 deg C	53.4 %	1017 hPa
1750760433	27.1 deg C	54.6 %	1016.7 hPa
1750759533	26.7 deg C	54.4 %	1013.4 hPa
1750757732	26.4 deg C	55.3 %	1016.5 hPa
1750756832	26.5 deg C	54.9 %	1014.3 hPa
1750755932	26.1 deg C	53.7 %	1015.9 hPa
1750755032	26 deg C	52.5 %	1013.6 hPa
1750754132	26.1 deg C	51.7 %	1014.3 hPa
1750753232	26 deg C	50.9 %	1015.3 hPa
1750752332	26 deg C	51 %	1017.8 hPa
1750751432	25.9 deg C	47.1 %	0 hPa
1750750532	25.8 deg C	46.8 %	0 hPa
1750749632	25.4 deg C	47.1 %	0 hPa
1750748732	25.1 deg C	48.8 %	0 hPa
1750747885	24.8 deg C	50.1 %	1019.9 hPa
1750746985	24 deg C	50.9 %	1020.3 hPa
1750746084	22.7 deg C	53.8 %	1020.8 hPa
1750745184	23.4 deg C	53 %	1019.7 hPa

*Used Equation Coefficients:

Temp: 0, 0.1, 0

Humi: 0, 0.1, 0

Baro: 0, 0.1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)