SR9VJK-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9VJK-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1788648067	0 Count	703 Count	0 Count	0 VDC	0 VDC
1788646266	0 Count	566 Count	0 Count	0 VDC	0 VDC
1788644466	0 Count	422 Count	0 Count	0 VDC	0 VDC
1788642666	0 Count	278 Count	0 Count	0 VDC	0 VDC
1788640866	0 Count	134 Count	0 Count	0 VDC	0 VDC
1788639066	0 Count	1007 Count	0 Count	0 VDC	0 VDC
1788637266	0 Count	859 Count	0 Count	0 VDC	0 VDC
1788635466	0 Count	720 Count	0 Count	0 VDC	0 VDC
1788633665	0 Count	568 Count	0 Count	0 VDC	0 VDC
1788631865	0 Count	443 Count	0 Count	0 VDC	0 VDC
1788630065	0 Count	270 Count	0 Count	0 VDC	0 VDC
1788628265	0 Count	126 Count	0 Count	0 VDC	0 VDC
1788626463	0 Count	1059 Count	0 Count	0 VDC	0 VDC
1788624663	0 Count	968 Count	0 Count	0 VDC	0 VDC
1788622863	0 Count	852 Count	0 Count	0 VDC	0 VDC
1788621063	0 Count	743 Count	0 Count	0 VDC	0 VDC
1788619263	0 Count	623 Count	0 Count	0 VDC	0 VDC
1788617463	0 Count	532 Count	0 Count	0 VDC	0 VDC
1788615669	0 Count	432 Count	0 Count	0 VDC	0 VDC
1788613863	0 Count	303 Count	0 Count	0 VDC	0 VDC
1788612062	0 Count	218 Count	0 Count	0 VDC	0 VDC
1788610262	0 Count	108 Count	0 Count	0 VDC	0 VDC
1788608462	0 Count	1018 Count	0 Count	0 VDC	0 VDC
1788606662	0 Count	905 Count	0 Count	0 VDC	0 VDC
1788604863	0 Count	780 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)