HS3LSE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS3LSE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1753635834	9 Pkt	0 Pkt	0 Pkt	-58 dBm	0.29 V
1753633107	9 Pkt	0 Pkt	0 Pkt	-58 dBm	0.12 V
1753630405	97 Pkt	0 Pkt	0 Pkt	-58 dBm	0.12 V
1753627652	70 Pkt	1 Pkt	0 Pkt	-58 dBm	0.12 V
1753624925	88 Pkt	0 Pkt	0 Pkt	-57 dBm	0.29 V
1753619468	40 Pkt	1 Pkt	0 Pkt	-58 dBm	0.29 V
1753616741	40 Pkt	0 Pkt	0 Pkt	-58 dBm	0.1 V
1753611284	94 Pkt	0 Pkt	0 Pkt	-58 dBm	0.12 V
1753608556	27 Pkt	0 Pkt	0 Pkt	-58 dBm	0.12 V
1753605829	74 Pkt	0 Pkt	0 Pkt	-57 dBm	0.12 V
1753603101	188 Pkt	0 Pkt	0 Pkt	-58 dBm	0.1 V
1753600373	122 Pkt	0 Pkt	0 Pkt	-58 dBm	0.12 V
1753597644	128 Pkt	0 Pkt	0 Pkt	-58 dBm	0.12 V
1753594915	121 Pkt	0 Pkt	0 Pkt	-58 dBm	0.12 V
1753592186	109 Pkt	1 Pkt	1 Pkt	-58 dBm	0.29 V
1753589459	129 Pkt	0 Pkt	0 Pkt	-59 dBm	0.12 V
1753586729	41 Pkt	0 Pkt	0 Pkt	-58 dBm	0.12 V
1753584001	66 Pkt	0 Pkt	0 Pkt	-58 dBm	0.29 V
1753578546	27 Pkt	0 Pkt	0 Pkt	-58 dBm	0.12 V
1753573092	92 Pkt	0 Pkt	0 Pkt	-59 dBm	0.29 V
1753570364	180 Pkt	0 Pkt	0 Pkt	-58 dBm	0.12 V
1753567633	53 Pkt	0 Pkt	0 Pkt	-58 dBm	0.29 V
1753563395	24 Pkt	8 Pkt	9 Pkt	-58 dBm	0.29 V
1753560668	15 Pkt	18 Pkt	19 Pkt	-58 dBm	0.12 V
1753557939	81 Pkt	1 Pkt	1 Pkt	-58 dBm	0.12 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)