TB8ATA-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB8ATA-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1757932404	12 Pkt	0 Pkt	-73 dBm	12.43 V
1757931798	18 Pkt	0 Pkt	-73 dBm	12.43 V
1757931154	16 Pkt	0 Pkt	-72 dBm	12.43 V
1757930529	14 Pkt	0 Pkt	-72 dBm	12.43 V
1757929903	15 Pkt	0 Pkt	-72 dBm	12.33 V
1757929279	22 Pkt	0 Pkt	-73 dBm	12.43 V
1757928028	26 Pkt	0 Pkt	-72 dBm	12.43 V
1757927402	33 Pkt	0 Pkt	-71 dBm	12.43 V
1757926776	22 Pkt	0 Pkt	-71 dBm	12.43 V
1757926151	31 Pkt	0 Pkt	-71 dBm	12.45 V
1757925525	35 Pkt	0 Pkt	-70 dBm	12.3 V
1757924896	36 Pkt	0 Pkt	-70 dBm	12.33 V
1757924269	49 Pkt	0 Pkt	-70 dBm	12.43 V
1757923637	45 Pkt	0 Pkt	-70 dBm	12.43 V
1757923009	70 Pkt	0 Pkt	-70 dBm	12.43 V
1757922372	57 Pkt	0 Pkt	-70 dBm	12.43 V
1757921741	40 Pkt	0 Pkt	-70 dBm	12.43 V
1757921108	65 Pkt	0 Pkt	-70 dBm	12.3 V
1757920477	37 Pkt	0 Pkt	-69 dBm	12.3 V
1757919850	31 Pkt	0 Pkt	-70 dBm	12.3 V
1757919224	17 Pkt	0 Pkt	-69 dBm	12.3 V
1757918598	24 Pkt	0 Pkt	-69 dBm	12.3 V
1757917974	20 Pkt	1 Pkt	-69 dBm	12.43 V
1757917348	19 Pkt	1 Pkt	-69 dBm	12.43 V
1757916723	16 Pkt	0 Pkt	-69 dBm	12.43 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)