EA4URA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA4URA-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784670558	12.83 Volt	280 Pkt	130 Pkt	93 Pcnt
1784666954	12.98 Volt	250 Pkt	130 Pkt	90 Pcnt
1784663351	13.05 Volt	270 Pkt	140 Pkt	90 Pcnt
1784659747	13.73 Volt	270 Pkt	150 Pkt	81 Pcnt
1784656144	13.8 Volt	220 Pkt	110 Pkt	82 Pcnt
1784652540	13.88 Volt	250 Pkt	140 Pkt	75 Pcnt
1784648937	13.65 Volt	220 Pkt	100 Pkt	89 Pcnt
1784645333	13.58 Volt	250 Pkt	120 Pkt	86 Pcnt
1784641730	13.8 Volt	190 Pkt	80 Pkt	89 Pcnt
1784638129	13.88 Volt	190 Pkt	80 Pkt	86 Pcnt
1784634524	13.8 Volt	170 Pkt	80 Pkt	91 Pcnt
1784630919	13.8 Volt	170 Pkt	80 Pkt	85 Pcnt
1784627316	14.03 Volt	180 Pkt	80 Pkt	86 Pcnt
1784623713	14.33 Volt	220 Pkt	90 Pkt	83 Pcnt
1784620109	14.03 Volt	280 Pkt	120 Pkt	85 Pcnt
1784616506	14.18 Volt	230 Pkt	90 Pkt	90 Pcnt
1784612903	13.13 Volt	210 Pkt	80 Pkt	88 Pcnt
1784609299	12.83 Volt	240 Pkt	90 Pkt	90 Pcnt
1784605695	12.9 Volt	210 Pkt	90 Pkt	89 Pcnt
1784602092	12.98 Volt	210 Pkt	80 Pkt	88 Pcnt
1784598488	12.98 Volt	210 Pkt	80 Pkt	94 Pcnt
1784594885	12.98 Volt	190 Pkt	70 Pkt	86 Pcnt
1784591281	12.98 Volt	200 Pkt	70 Pkt	92 Pcnt
1784587678	12.98 Volt	200 Pkt	90 Pkt	82 Pcnt
1784584074	12.98 Volt	220 Pkt	90 Pkt	88 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

I2: 0, 9.76, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)