9A7KXP-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX 1h*	AKU +/-*	Akumul*	PV in*	Temp*
1772734782	1130 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772734481	1120 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772734181	1130 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772733881	1120 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772733881	1120 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772733580	1130 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772733280	1120 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772732980	1130 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772732680	1130 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772732379	1140 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772732079	1140 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772732079	1140 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772731779	1150 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772731478	1150 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772731178	1140 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772730878	1130 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772730577	1110 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772730278	1110 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772730277	1110 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772729977	1110 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772729677	1100 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772729376	1110 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772729076	1110 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772728776	1100 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C
1772728476	1110 Paket	0.2 A--48V	0.1 Volt	0.2 A--48V	14 C

*Used Equation Coefficients:

RX 1h: 0, 10, 0

AKU +/-: 0, 0.1953, -24.8031

Akumul: 0, 0.4716, 0.1

PV in: 0, 0.1953, -24.8031

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)