SR5SAN-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5SAN-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1772590867	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	2 count/10m	5 count/10m
1772589667	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	5 count/10m
1772588467	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	1 count/10m	5 count/10m
1772587267	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	1 count/10m	5 count/10m
1772586067	0.02 Rx Erlang	0.01 Tx Erlang	13 count/10m	2 count/10m	5 count/10m
1772584876	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	2 count/10m	6 count/10m
1772583667	0.03 Rx Erlang	0.01 Tx Erlang	15 count/10m	1 count/10m	4 count/10m
1772581267	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	6 count/10m
1772580067	0.02 Rx Erlang	0.01 Tx Erlang	9 count/10m	2 count/10m	3 count/10m
1772577667	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	1 count/10m	5 count/10m
1772576467	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	5 count/10m
1772575267	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	1 count/10m	5 count/10m
1772574067	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	1 count/10m	6 count/10m
1772572867	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	1 count/10m	4 count/10m
1772571667	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	1 count/10m	5 count/10m
1772570467	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	1 count/10m	5 count/10m
1772569268	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	1 count/10m	4 count/10m
1772568068	0.02 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	5 count/10m
1772566867	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1772565667	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	1 count/10m	5 count/10m
1772564470	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	5 count/10m
1772563270	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	5 count/10m
1772562067	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	5 count/10m
1772560872	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	1 count/10m	5 count/10m
1772559671	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	5 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)