SP2RO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1772685093	46 Count	303 Count	38 Count	1.43 VDC
1772684192	41 Count	262 Count	34 Count	1.49 VDC
1772683292	35 Count	234 Count	29 Count	1.6 VDC
1772682390	31 Count	196 Count	26 Count	1.53 VDC
1772681489	22 Count	160 Count	18 Count	1.54 VDC
1772680589	18 Count	131 Count	15 Count	1.4 VDC
1772679688	13 Count	98 Count	11 Count	1.52 VDC
1772678787	9 Count	61 Count	8 Count	1.57 VDC
1772677886	3 Count	32 Count	3 Count	1.64 VDC
1772676986	159 Count	1023 Count	129 Count	1.55 VDC
1772676086	153 Count	993 Count	124 Count	1.44 VDC
1772675184	148 Count	959 Count	120 Count	1.62 VDC
1772674283	141 Count	931 Count	114 Count	1.59 VDC
1772673383	137 Count	897 Count	111 Count	1.56 VDC
1772672482	133 Count	873 Count	108 Count	1.44 VDC
1772671581	126 Count	827 Count	102 Count	1.54 VDC
1772669780	115 Count	759 Count	93 Count	1.44 VDC
1772668879	112 Count	733 Count	91 Count	1.52 VDC
1772667978	107 Count	699 Count	87 Count	1.54 VDC
1772667077	102 Count	673 Count	83 Count	1.43 VDC
1772666176	97 Count	637 Count	79 Count	1.58 VDC
1772665276	94 Count	612 Count	77 Count	1.56 VDC
1772664375	88 Count	575 Count	72 Count	1.58 VDC
1772663474	83 Count	547 Count	68 Count	1.49 VDC
1772662573	78 Count	518 Count	64 Count	1.59 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)