YO3JAZ-EY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-EY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hmdt*	Baro*	RSSI*	Load*
1784669407	26 C	54 %	1014 mbar	-59 dBm	100 %
1784669047	26 C	54 %	1014 mbar	-59 dBm	100 %
1784668687	26 C	53.6 %	1014.4 mbar	-59 dBm	100 %
1784668327	26 C	53.6 %	1014.4 mbar	-59 dBm	100 %
1784667967	26 C	53.6 %	1014 mbar	-60 dBm	100 %
1784667607	26 C	53.6 %	1014 mbar	-59 dBm	100 %
1784667247	26 C	53.6 %	1014 mbar	-59 dBm	100 %
1784666887	26 C	53.6 %	1014 mbar	-60 dBm	100 %
1784666527	26.5 C	53.6 %	1014.4 mbar	-60 dBm	100 %
1784666167	26.5 C	53.6 %	1014.4 mbar	-59 dBm	100 %
1784665807	26.5 C	53.2 %	1014.4 mbar	-60 dBm	100 %
1784665447	26.5 C	53.6 %	1014.4 mbar	-60 dBm	100 %
1784665087	26.5 C	53.6 %	1014.8 mbar	-59 dBm	100 %
1784664727	26.5 C	53.6 %	1014.8 mbar	-61 dBm	100 %
1784664367	26.5 C	53.6 %	1014.8 mbar	-59 dBm	100 %
1784664007	26.5 C	52 %	1014 mbar	-59 dBm	100 %
1784663647	26.5 C	52 %	1013.6 mbar	-59 dBm	100 %
1784663287	26.5 C	51.2 %	1013.2 mbar	-59 dBm	100 %
1784662927	26.5 C	51.2 %	1013.2 mbar	-59 dBm	100 %
1784662567	26.5 C	50.8 %	1013.6 mbar	-59 dBm	100 %
1784662207	26.5 C	51.2 %	1013.2 mbar	-59 dBm	100 %
1784661847	27 C	51.2 %	1013.6 mbar	-59 dBm	100 %
1784661487	27 C	51.2 %	1013.6 mbar	-59 dBm	100 %
1784661127	27 C	51.2 %	1013.6 mbar	-59 dBm	100 %
1784660767	27 C	51.6 %	1013.6 mbar	-59 dBm	100 %

*Used Equation Coefficients:

Temp: 0, 0.5, -25

Hmdt: 0, 0.4, 0

Baro: 0, 0.4, 950

RSSI: 0, -1, 0

Load: 0, 0.4, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)