IW2EPA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW2EPA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*
1762224150	29 Pkt/10m	29 Pkt/10m
1762222947	20 Pkt/10m	20 Pkt/10m
1762221743	22 Pkt/10m	22 Pkt/10m
1762220539	23 Pkt/10m	23 Pkt/10m
1762219335	20 Pkt/10m	20 Pkt/10m
1762218132	21 Pkt/10m	19 Pkt/10m
1762216928	27 Pkt/10m	21 Pkt/10m
1762215724	29 Pkt/10m	28 Pkt/10m
1762214520	22 Pkt/10m	20 Pkt/10m
1762213317	1 Pkt/10m	0 Pkt/10m
1762213302	0 Pkt/10m	0 Pkt/10m
1762212872	25 Pkt/10m	25 Pkt/10m
1762211668	26 Pkt/10m	25 Pkt/10m
1762210465	28 Pkt/10m	28 Pkt/10m
1762209261	28 Pkt/10m	26 Pkt/10m
1762208057	27 Pkt/10m	24 Pkt/10m
1762206853	16 Pkt/10m	16 Pkt/10m
1762205919	29 Pkt/10m	28 Pkt/10m
1762204715	22 Pkt/10m	14 Pkt/10m
1762203512	16 Pkt/10m	16 Pkt/10m
1762202308	15 Pkt/10m	15 Pkt/10m
1762201104	22 Pkt/10m	22 Pkt/10m
1762199900	27 Pkt/10m	24 Pkt/10m
1762198696	23 Pkt/10m	23 Pkt/10m
1762197493	22 Pkt/10m	22 Pkt/10m

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)