E25DQY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E25DQY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	SUN*
1784717461	0 Pkt	1 Pkt	-62 dBm	31 %
1784715639	0 Pkt	0 Pkt	-61 dBm	57 %
1784713817	0 Pkt	0 Pkt	-61 dBm	55 %
1784711995	0 Pkt	1 Pkt	-62 dBm	54 %
1784710173	0 Pkt	15 Pkt	-61 dBm	56 %
1784708350	0 Pkt	36 Pkt	-63 dBm	55 %
1784706526	0 Pkt	43 Pkt	-62 dBm	60 %
1784704701	0 Pkt	39 Pkt	-63 dBm	62 %
1784702876	0 Pkt	23 Pkt	-64 dBm	60 %
1784701054	0 Pkt	38 Pkt	-60 dBm	52 %
1784699231	1 Pkt	7 Pkt	-63 dBm	61 %
1784697408	0 Pkt	0 Pkt	-62 dBm	58 %
1784695586	0 Pkt	0 Pkt	-62 dBm	52 %
1784693764	0 Pkt	0 Pkt	-62 dBm	58 %
1784691942	0 Pkt	0 Pkt	-62 dBm	65 %
1784690120	0 Pkt	1 Pkt	-62 dBm	62 %
1784688300	0 Pkt	2 Pkt	-61 dBm	66 %
1784686475	0 Pkt	0 Pkt	-61 dBm	57 %
1784684653	0 Pkt	1 Pkt	-60 dBm	65 %
1784682831	0 Pkt	1 Pkt	-60 dBm	53 %
1784681009	0 Pkt	6 Pkt	-61 dBm	52 %
1784679187	0 Pkt	1 Pkt	-61 dBm	40 %
1784677365	0 Pkt	0 Pkt	-61 dBm	33 %
1784675543	0 Pkt	2 Pkt	-61 dBm	14 %
1784673721	0 Pkt	0 Pkt	-60 dBm	0 %

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

SUN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)