EL-UW5ELK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-UW5ELK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1761506013	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	6 TXcount/10m
1761505413	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	7 TXcount/10m
1761504813	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1761504213	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	7 TXcount/10m
1761503613	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	19 TXcount/10m
1761503013	0 RX Erlang	0.33 TX Erlang	0 RXcount/10m	28 TXcount/10m
1761502413	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	4 TXcount/10m
1761501813	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	18 TXcount/10m
1761501213	0 RX Erlang	0.11 TX Erlang	0 RXcount/10m	20 TXcount/10m
1761500613	0 RX Erlang	0.09 TX Erlang	0 RXcount/10m	12 TXcount/10m
1761500013	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	12 TXcount/10m
1761499413	0 RX Erlang	0.58 TX Erlang	0 RXcount/10m	36 TXcount/10m
1761498813	0 RX Erlang	0.6 TX Erlang	0 RXcount/10m	32 TXcount/10m
1761498213	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	12 TXcount/10m
1761497613	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	15 TXcount/10m
1761497013	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	7 TXcount/10m
1761496413	0 RX Erlang	0.27 TX Erlang	0 RXcount/10m	21 TXcount/10m
1761495813	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	22 TXcount/10m
1761495213	0 RX Erlang	0.97 TX Erlang	0 RXcount/10m	15 TXcount/10m
1761494613	0 RX Erlang	0.96 TX Erlang	0 RXcount/10m	18 TXcount/10m
1761494013	0 RX Erlang	0.84 TX Erlang	0 RXcount/10m	27 TXcount/10m
1761493413	0 RX Erlang	0.87 TX Erlang	0 RXcount/10m	22 TXcount/10m
1761492813	0 RX Erlang	0.54 TX Erlang	0 RXcount/10m	19 TXcount/10m
1761492213	0 RX Erlang	0.72 TX Erlang	0 RXcount/10m	26 TXcount/10m
1761491618	0 RX Erlang	0.73 TX Erlang	0 RXcount/10m	32 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)