VK2GJ-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vbat*	Vsol*	Psys*	Temp*	AirP*
1773116454	3.96 V	0.62 V	152 mW	27.9 degC	99687.5 Pa
1773114653	3.94 V	0.63 V	170 mW	28.2 degC	99687.5 Pa
1773112876	3.95 V	0.68 V	158 mW	28.1 degC	99700 Pa
1773111053	3.84 V	0.72 V	160 mW	27.6 degC	99712.5 Pa
1773109266	3.99 V	0.99 V	152 mW	27.5 degC	99750 Pa
1773107355	3.87 V	0.51 V	182 mW	28.2 degC	99775 Pa
1773105534	3.73 V	0.49 V	152 mW	27.1 degC	99787.5 Pa
1773103737	3.63 V	0.59 V	166 mW	27.1 degC	99812.5 Pa
1773101973	3.87 V	0.71 V	168 mW	26.9 degC	99825 Pa
1773100138	3.59 V	0.5 V	184 mW	27.1 degC	99825 Pa
1773098350	3.5 V	0.58 V	200 mW	27.1 degC	99825 Pa
1773096561	3.69 V	0.65 V	230 mW	26.8 degC	99825 Pa
1773094632	3.88 V	0.39 V	174 mW	26.3 degC	99837.5 Pa
1773092938	3.65 V	0.5 V	362 mW	27.2 degC	99812.5 Pa
1773092037	3.59 V	0.48 V	356 mW	27.6 degC	99800 Pa
1773089612	3.51 V	0.42 V	402 mW	26.9 degC	99737.5 Pa
1773089326	3.54 V	0.41 V	258 mW	26.9 degC	99725 Pa
1773087449	3.6 V	0.39 V	234 mW	25.9 degC	99750 Pa
1773085685	3.81 V	0 V	254 mW	25.4 degC	99712.5 Pa
1773083853	3.56 V	0 V	236 mW	25.9 degC	99662.5 Pa
1773082060	3.81 V	0 V	262 mW	25.6 degC	99612.5 Pa
1773078459	3.64 V	0 V	238 mW	25.7 degC	99587.5 Pa
1773076676	3.8 V	0 V	236 mW	25.7 degC	99600 Pa
1773074896	3.61 V	0 V	230 mW	25.8 degC	99612.5 Pa
1773073054	3.78 V	0 V	232 mW	25.9 degC	99575 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Psys: 0, 2, 0

Temp: 0, 0.1, -100

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)