IR2CW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2CW. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Dg10m*	DgR*	Eff1h*
1780549400	5 Pkt	1 Pkt	1.04 Pcnt	11 Pcnt
1780549100	3 Pkt	1 Pkt	1.04 Pcnt	6 Pcnt
1780548800	2 Pkt	1 Pkt	1.03 Pcnt	5 Pcnt
1780548500	0 Pkt	0 Pkt	1.03 Pcnt	1 Pcnt
1780548200	0 Pkt	0 Pkt	1.03 Pcnt	2 Pcnt
1780547900	1 Pkt	0 Pkt	1.03 Pcnt	2 Pcnt
1780547600	0 Pkt	0 Pkt	1.03 Pcnt	2 Pcnt
1780547300	0 Pkt	0 Pkt	1.03 Pcnt	2 Pcnt
1780547000	0 Pkt	0 Pkt	1.03 Pcnt	2 Pcnt
1780546700	0 Pkt	0 Pkt	1.03 Pcnt	5 Pcnt
1780546400	0 Pkt	0 Pkt	1.03 Pcnt	5 Pcnt
1780546101	0 Pkt	0 Pkt	1.03 Pcnt	5 Pcnt
1780545800	0 Pkt	0 Pkt	1.03 Pcnt	4 Pcnt
1780545501	0 Pkt	0 Pkt	1.03 Pcnt	6 Pcnt
1780545201	0 Pkt	0 Pkt	1.03 Pcnt	7 Pcnt
1780544901	0 Pkt	0 Pkt	1.03 Pcnt	6 Pcnt
1780544601	1 Pkt	0 Pkt	1.03 Pcnt	6 Pcnt
1780544301	1 Pkt	0 Pkt	1.03 Pcnt	6 Pcnt
1780544001	0 Pkt	0 Pkt	1.03 Pcnt	4 Pcnt
1780543701	1 Pkt	0 Pkt	1.03 Pcnt	6 Pcnt
1780543401	1 Pkt	0 Pkt	1.03 Pcnt	6 Pcnt
1780543101	0 Pkt	0 Pkt	1.03 Pcnt	4 Pcnt
1780542801	0 Pkt	0 Pkt	1.03 Pcnt	4 Pcnt
1780542501	1 Pkt	0 Pkt	1.03 Pcnt	4 Pcnt
1780542201	1 Pkt	0 Pkt	1.03 Pcnt	6 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)