DG1JLA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG1JLA-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1780558439	12.32 Volt	530 Pkt	340 Pkt	86 Pcnt	76 Pcnt
1780557539	12.32 Volt	480 Pkt	380 Pkt	87 Pcnt	76 Pcnt
1780556639	12.32 Volt	660 Pkt	370 Pkt	86 Pcnt	76 Pcnt
1780555740	12.32 Volt	470 Pkt	360 Pkt	86 Pcnt	76 Pcnt
1780554840	12.32 Volt	540 Pkt	360 Pkt	82 Pcnt	76 Pcnt
1780553939	12.32 Volt	530 Pkt	320 Pkt	78 Pcnt	76 Pcnt
1780553039	12.32 Volt	610 Pkt	320 Pkt	77 Pcnt	76 Pcnt
1780552139	12.32 Volt	460 Pkt	320 Pkt	73 Pcnt	76 Pcnt
1780551240	12.32 Volt	510 Pkt	340 Pkt	74 Pcnt	76 Pcnt
1780550340	12.32 Volt	500 Pkt	380 Pkt	74 Pcnt	76 Pcnt
1780549440	12.32 Volt	600 Pkt	450 Pkt	72 Pcnt	76 Pcnt
1780548540	12.32 Volt	590 Pkt	470 Pkt	70 Pcnt	76 Pcnt
1780547640	12.32 Volt	650 Pkt	450 Pkt	68 Pcnt	76 Pcnt
1780546740	12.32 Volt	880 Pkt	430 Pkt	66 Pcnt	76 Pcnt
1780545840	12.32 Volt	680 Pkt	370 Pkt	63 Pcnt	76 Pcnt
1780544940	12.32 Volt	470 Pkt	360 Pkt	63 Pcnt	76 Pcnt
1780544040	12.32 Volt	690 Pkt	370 Pkt	64 Pcnt	76 Pcnt
1780543140	12.32 Volt	460 Pkt	370 Pkt	64 Pcnt	76 Pcnt
1780542240	12.32 Volt	640 Pkt	390 Pkt	66 Pcnt	76 Pcnt
1780541340	12.32 Volt	550 Pkt	380 Pkt	64 Pcnt	76 Pcnt
1780540440	12.32 Volt	630 Pkt	380 Pkt	63 Pcnt	76 Pcnt
1780539540	12.32 Volt	690 Pkt	370 Pkt	63 Pcnt	76 Pcnt
1780538640	12.32 Volt	510 Pkt	370 Pkt	63 Pcnt	76 Pcnt
1780537740	12.32 Volt	650 Pkt	390 Pkt	65 Pcnt	76 Pcnt
1780536840	12.32 Volt	660 Pkt	390 Pkt	67 Pcnt	76 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)