SP9UVG-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP9UVG-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Effog*
1765478230	12.88 Volt	500 Pkt	140 Pkt	87 Pcnt	870 Pcnt
1765476669	12.88 Volt	520 Pkt	140 Pkt	86 Pcnt	870 Pcnt
1765475888	12.88 Volt	560 Pkt	150 Pkt	87 Pcnt	870 Pcnt
1765475107	12.88 Volt	530 Pkt	150 Pkt	87 Pcnt	870 Pcnt
1765473546	12.88 Volt	300 Pkt	80 Pkt	88 Pcnt	880 Pcnt
1765472765	12.88 Volt	160 Pkt	40 Pkt	90 Pcnt	900 Pcnt
1765472585	12.88 Volt	130 Pkt	40 Pkt	90 Pcnt	900 Pcnt
1765471759	12.8 Volt	560 Pkt	140 Pkt	85 Pcnt	840 Pcnt
1765470198	12.88 Volt	550 Pkt	160 Pkt	82 Pcnt	830 Pcnt
1765469417	12.88 Volt	570 Pkt	180 Pkt	82 Pcnt	820 Pcnt
1765468636	12.88 Volt	600 Pkt	190 Pkt	83 Pcnt	820 Pcnt
1765467855	12.88 Volt	550 Pkt	160 Pkt	82 Pcnt	820 Pcnt
1765467075	12.88 Volt	430 Pkt	120 Pkt	84 Pcnt	830 Pcnt
1765466303	12.88 Volt	300 Pkt	70 Pkt	85 Pcnt	840 Pcnt
1765465513	12.88 Volt	170 Pkt	40 Pkt	84 Pcnt	820 Pcnt
1765464732	12.88 Volt	30 Pkt	0 Pkt	85 Pcnt	800 Pcnt
1765463951	12.88 Volt	0 Pkt	0 Pkt	0 Pcnt	780 Pcnt
1765463171	12.88 Volt	0 Pkt	0 Pkt	0 Pcnt	780 Pcnt
1765460048	12.88 Volt	0 Pkt	0 Pkt	0 Pcnt	790 Pcnt
1765459267	12.88 Volt	20 Pkt	0 Pkt	78 Pcnt	790 Pcnt
1765458486	12.88 Volt	70 Pkt	10 Pkt	79 Pcnt	790 Pcnt
1765456925	12.88 Volt	70 Pkt	10 Pkt	80 Pcnt	800 Pcnt
1765456154	12.88 Volt	70 Pkt	10 Pkt	80 Pcnt	800 Pcnt
1765455964	12.88 Volt	70 Pkt	10 Pkt	80 Pcnt	800 Pcnt
1765454713	12.88 Volt	320 Pkt	80 Pkt	77 Pcnt	810 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Effog: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)