ER-OE4XUB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-OE4XUB. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1780599727	0 RX Erlang	0.21 TX Erlang	0 RXcount/10m	16 TXcount/10m
1780599127	0 RX Erlang	0.09 TX Erlang	0 RXcount/10m	13 TXcount/10m
1780598527	0 RX Erlang	0.32 TX Erlang	0 RXcount/10m	9 TXcount/10m
1780597927	0 RX Erlang	0.22 TX Erlang	0 RXcount/10m	12 TXcount/10m
1780597327	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	4 TXcount/10m
1780596727	0 RX Erlang	0.07 TX Erlang	0 RXcount/10m	12 TXcount/10m
1780596127	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	12 TXcount/10m
1780595527	0 RX Erlang	0.56 TX Erlang	0 RXcount/10m	16 TXcount/10m
1780594927	0 RX Erlang	0.95 TX Erlang	0 RXcount/10m	14 TXcount/10m
1780594327	0 RX Erlang	0.96 TX Erlang	0 RXcount/10m	13 TXcount/10m
1780593727	0 RX Erlang	0.46 TX Erlang	0 RXcount/10m	12 TXcount/10m
1780593127	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1780592527	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1780591927	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	14 TXcount/10m
1780591327	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	14 TXcount/10m
1780590727	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	8 TXcount/10m
1780590127	0 RX Erlang	0.06 TX Erlang	1 RXcount/10m	13 TXcount/10m
1780589527	0 RX Erlang	0.46 TX Erlang	0 RXcount/10m	15 TXcount/10m
1780588927	0 RX Erlang	0.09 TX Erlang	0 RXcount/10m	17 TXcount/10m
1780588327	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	8 TXcount/10m
1780587727	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	12 TXcount/10m
1780587127	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	7 TXcount/10m
1780586527	0 RX Erlang	0.02 TX Erlang	1 RXcount/10m	4 TXcount/10m
1780585927	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	8 TXcount/10m
1780585327	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	6 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)