XE2VP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2VP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1753663409	13.13 Volt	100 Pkt	70 Pkt	45 Pcnt	-64 C
1753661626	13.28 Volt	100 Pkt	80 Pkt	37 Pcnt	-64 C
1753660709	13.35 Volt	130 Pkt	90 Pkt	38 Pcnt	-64 C
1753659809	13.28 Volt	170 Pkt	100 Pkt	41 Pcnt	-64 C
1753658009	13.28 Volt	180 Pkt	90 Pkt	47 Pcnt	-64 C
1753657109	13.43 Volt	160 Pkt	90 Pkt	48 Pcnt	-64 C
1753656209	13.43 Volt	120 Pkt	80 Pkt	48 Pcnt	-64 C
1753655309	13.5 Volt	110 Pkt	80 Pkt	53 Pcnt	-64 C
1753654410	13.5 Volt	100 Pkt	70 Pkt	53 Pcnt	-64 C
1753652610	13.58 Volt	140 Pkt	100 Pkt	60 Pcnt	-64 C
1753651710	13.43 Volt	150 Pkt	100 Pkt	60 Pcnt	-64 C
1753649911	13.58 Volt	150 Pkt	90 Pkt	55 Pcnt	-64 C
1753649010	14.25 Volt	130 Pkt	80 Pkt	51 Pcnt	-64 C
1753648129	14.18 Volt	110 Pkt	70 Pkt	49 Pcnt	-64 C
1753647210	14.18 Volt	110 Pkt	70 Pkt	50 Pcnt	-64 C
1753646310	13.95 Volt	120 Pkt	70 Pkt	54 Pcnt	-64 C
1753645411	14.33 Volt	120 Pkt	70 Pkt	57 Pcnt	-64 C
1753644510	14.1 Volt	110 Pkt	70 Pkt	60 Pcnt	-64 C
1753643610	14.03 Volt	100 Pkt	70 Pkt	65 Pcnt	-64 C
1753640910	14.4 Volt	110 Pkt	80 Pkt	71 Pcnt	-64 C
1753640010	14.03 Volt	120 Pkt	90 Pkt	75 Pcnt	-64 C
1753639110	14.25 Volt	130 Pkt	90 Pkt	75 Pcnt	-64 C
1753638210	14.55 Volt	130 Pkt	100 Pkt	76 Pcnt	-64 C
1753637310	14.33 Volt	130 Pkt	100 Pkt	76 Pcnt	-64 C
1753634610	13.8 Volt	150 Pkt	100 Pkt	68 Pcnt	-64 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)