W0OJY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0OJY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1788663299	13.45 Volt	180 Pkt	30 Pkt	75 Pcnt	90.5 F
1788662699	13.45 Volt	180 Pkt	30 Pkt	75 Pcnt	91.4 F
1788662099	13.45 Volt	200 Pkt	40 Pkt	74 Pcnt	91.4 F
1788661502	13.45 Volt	220 Pkt	50 Pkt	77 Pcnt	92.3 F
1788660299	13.45 Volt	240 Pkt	60 Pkt	79 Pcnt	93.2 F
1788659699	13.45 Volt	240 Pkt	60 Pkt	76 Pcnt	93.2 F
1788658500	13.45 Volt	240 Pkt	50 Pkt	81 Pcnt	95 F
1788657899	13.45 Volt	210 Pkt	40 Pkt	81 Pcnt	95 F
1788657301	13.45 Volt	200 Pkt	40 Pkt	78 Pcnt	95.9 F
1788656700	13.45 Volt	190 Pkt	40 Pkt	80 Pcnt	96.8 F
1788656099	13.45 Volt	180 Pkt	30 Pkt	82 Pcnt	96.8 F
1788655499	13.45 Volt	160 Pkt	30 Pkt	79 Pcnt	97.7 F
1788654299	13.45 Volt	150 Pkt	30 Pkt	75 Pcnt	98.6 F
1788653099	13.45 Volt	150 Pkt	30 Pkt	71 Pcnt	100.4 F
1788652500	13.45 Volt	160 Pkt	30 Pkt	71 Pcnt	100.4 F
1788651900	13.45 Volt	150 Pkt	30 Pkt	68 Pcnt	101.3 F
1788651299	13.45 Volt	150 Pkt	30 Pkt	69 Pcnt	101.3 F
1788650099	13.45 Volt	150 Pkt	30 Pkt	67 Pcnt	102.2 F
1788649499	13.45 Volt	150 Pkt	30 Pkt	69 Pcnt	102.2 F
1788648302	13.45 Volt	150 Pkt	30 Pkt	74 Pcnt	101.3 F
1788647100	13.45 Volt	160 Pkt	20 Pkt	78 Pcnt	100.4 F
1788646500	13.45 Volt	170 Pkt	20 Pkt	80 Pcnt	100.4 F
1788645899	13.45 Volt	160 Pkt	20 Pkt	80 Pcnt	100.4 F
1788645301	13.45 Volt	160 Pkt	20 Pkt	79 Pcnt	99.5 F
1788644700	13.45 Volt	160 Pkt	30 Pkt	80 Pcnt	99.5 F

*Used Equation Coefficients:

Vin: 0, 0.076, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)