KC8RFE-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC8RFE-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784671636	14.03 Volt	260 Pkt	170 Pkt	41 Pcnt
1784670436	14.03 Volt	280 Pkt	180 Pkt	42 Pcnt
1784669236	14.03 Volt	280 Pkt	180 Pkt	42 Pcnt
1784668036	14.03 Volt	270 Pkt	180 Pkt	41 Pcnt
1784666836	14.03 Volt	260 Pkt	170 Pkt	39 Pcnt
1784665636	14.03 Volt	250 Pkt	180 Pkt	40 Pcnt
1784664456	14.03 Volt	240 Pkt	170 Pkt	40 Pcnt
1784663236	14.03 Volt	240 Pkt	170 Pkt	39 Pcnt
1784662036	14.03 Volt	250 Pkt	170 Pkt	38 Pcnt
1784660836	14.03 Volt	280 Pkt	180 Pkt	40 Pcnt
1784659636	14.03 Volt	290 Pkt	180 Pkt	39 Pcnt
1784658436	14.03 Volt	330 Pkt	180 Pkt	40 Pcnt
1784657236	14.03 Volt	400 Pkt	200 Pkt	43 Pcnt
1784656036	14.03 Volt	480 Pkt	220 Pkt	48 Pcnt
1784654836	14.03 Volt	560 Pkt	250 Pkt	52 Pcnt
1784653636	14.03 Volt	570 Pkt	250 Pkt	53 Pcnt
1784652436	14.03 Volt	540 Pkt	230 Pkt	50 Pcnt
1784651236	14.03 Volt	520 Pkt	210 Pkt	49 Pcnt
1784650036	13.95 Volt	490 Pkt	220 Pkt	45 Pcnt
1784648836	14.03 Volt	520 Pkt	230 Pkt	48 Pcnt
1784647657	14.03 Volt	500 Pkt	220 Pkt	47 Pcnt
1784646436	14.03 Volt	600 Pkt	220 Pkt	52 Pcnt
1784645236	14.03 Volt	670 Pkt	230 Pkt	53 Pcnt
1784644036	14.03 Volt	780 Pkt	280 Pkt	58 Pcnt
1784642836	14.03 Volt	800 Pkt	310 Pkt	58 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)