VK5RBV-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RBV-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dig1h*	Eff1h*
1780614907	13.76 Volt	13 Pkt	3 Pkt	94 Pcnt
1780611304	13.76 Volt	14 Pkt	3 Pkt	97 Pcnt
1780607700	13.76 Volt	14 Pkt	3 Pkt	95 Pcnt
1780604097	13.76 Volt	19 Pkt	5 Pkt	90 Pcnt
1780600494	13.76 Volt	14 Pkt	3 Pkt	93 Pcnt
1780596890	13.76 Volt	13 Pkt	3 Pkt	93 Pcnt
1780593287	13.76 Volt	13 Pkt	3 Pkt	96 Pcnt
1780589683	13.76 Volt	12 Pkt	3 Pkt	98 Pcnt
1780586080	13.76 Volt	13 Pkt	3 Pkt	94 Pcnt
1780582476	13.76 Volt	13 Pkt	3 Pkt	94 Pcnt
1780578873	13.76 Volt	12 Pkt	3 Pkt	94 Pcnt
1780575269	13.76 Volt	15 Pkt	3 Pkt	95 Pcnt
1780571666	13.54 Volt	21 Pkt	4 Pkt	92 Pcnt
1780568062	13.76 Volt	19 Pkt	3 Pkt	95 Pcnt
1780564459	13.76 Volt	22 Pkt	3 Pkt	96 Pcnt
1780560855	13.76 Volt	21 Pkt	3 Pkt	95 Pcnt
1780557252	13.76 Volt	20 Pkt	3 Pkt	97 Pcnt
1780553648	13.76 Volt	18 Pkt	3 Pkt	98 Pcnt
1780550045	13.76 Volt	20 Pkt	3 Pkt	94 Pcnt
1780546441	13.69 Volt	18 Pkt	3 Pkt	90 Pcnt
1780542838	13.76 Volt	22 Pkt	3 Pkt	98 Pcnt
1780539234	13.76 Volt	20 Pkt	4 Pkt	93 Pcnt
1780535631	13.69 Volt	14 Pkt	3 Pkt	97 Pcnt
1780532027	13.69 Volt	14 Pkt	3 Pkt	94 Pcnt
1780528424	13.76 Volt	18 Pkt	3 Pkt	90 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 1, 0

Dig1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)