DJ9ZZZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DJ9ZZZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1784675094	12.23 Volt	310 Pkt	90 Pcnt	-64 C
1784674789	12.23 Volt	320 Pkt	90 Pcnt	-64 C
1784674489	12.23 Volt	320 Pkt	90 Pcnt	-64 C
1784674191	12.23 Volt	320 Pkt	90 Pcnt	-64 C
1784673889	12.23 Volt	320 Pkt	91 Pcnt	-64 C
1784673593	12.23 Volt	320 Pkt	91 Pcnt	-64 C
1784673288	12.23 Volt	310 Pkt	90 Pcnt	-64 C
1784672988	12.23 Volt	310 Pkt	90 Pcnt	-64 C
1784672687	12.23 Volt	310 Pkt	90 Pcnt	-64 C
1784672387	12.23 Volt	310 Pkt	90 Pcnt	-64 C
1784672087	12.3 Volt	310 Pkt	90 Pcnt	-64 C
1784671787	12.23 Volt	300 Pkt	90 Pcnt	-64 C
1784671486	12.23 Volt	300 Pkt	91 Pcnt	-64 C
1784671186	12.23 Volt	310 Pkt	89 Pcnt	-64 C
1784670886	12.23 Volt	320 Pkt	88 Pcnt	-64 C
1784670585	12.23 Volt	310 Pkt	87 Pcnt	-64 C
1784670285	12.23 Volt	320 Pkt	87 Pcnt	-64 C
1784669989	12.23 Volt	330 Pkt	86 Pcnt	-64 C
1784669685	12.23 Volt	330 Pkt	86 Pcnt	-64 C
1784669384	12.3 Volt	340 Pkt	84 Pcnt	-64 C
1784669084	12.23 Volt	360 Pkt	84 Pcnt	-64 C
1784668784	12.23 Volt	360 Pkt	83 Pcnt	-64 C
1784668483	12.23 Volt	360 Pkt	82 Pcnt	-64 C
1784668183	12.23 Volt	380 Pkt	83 Pcnt	-64 C
1784667883	12.23 Volt	390 Pkt	82 Pcnt	-64 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)