SQ9IWE-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ9IWE-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*
1788572051	27 Count	1050 Count
1788570251	24 Count	924 Count
1788568450	20 Count	781 Count
1788566655	14 Count	662 Count
1788564854	11 Count	487 Count
1788563053	8 Count	354 Count
1788561252	5 Count	234 Count
1788559451	2 Count	116 Count
1788557650	24 Count	1085 Count
1788555850	21 Count	961 Count
1788554049	17 Count	787 Count
1788552254	11 Count	669 Count
1788550453	8 Count	540 Count
1788548652	5 Count	315 Count
1788546851	2 Count	177 Count
1788545050	21 Count	1139 Count
1788543249	18 Count	885 Count
1788541449	15 Count	756 Count
1788539648	11 Count	617 Count
1788537853	5 Count	374 Count
1788536052	2 Count	183 Count
1788534251	11 Count	1065 Count
1788532450	8 Count	812 Count
1788530649	5 Count	427 Count
1788528849	2 Count	227 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)