IQ8PC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ8PC-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EffT*
1772638971	14.03 Volt	220 Pkt	80 Pkt	74 Pcnt	74 Pcnt
1772638971	14.03 Volt	220 Pkt	80 Pkt	74 Pcnt	74 Pcnt
1772637173	14.03 Volt	220 Pkt	90 Pkt	73 Pcnt	74 Pcnt
1772635372	14.03 Volt	180 Pkt	80 Pkt	70 Pcnt	74 Pcnt
1772635371	14.03 Volt	180 Pkt	80 Pkt	70 Pcnt	74 Pcnt
1772633571	14.03 Volt	170 Pkt	70 Pkt	63 Pcnt	74 Pcnt
1772631772	14.03 Volt	200 Pkt	70 Pkt	66 Pcnt	74 Pcnt
1772631771	14.03 Volt	200 Pkt	70 Pkt	66 Pcnt	74 Pcnt
1772629971	14.03 Volt	220 Pkt	70 Pkt	74 Pcnt	74 Pcnt
1772628172	14.03 Volt	220 Pkt	80 Pkt	76 Pcnt	74 Pcnt
1772628171	14.03 Volt	220 Pkt	80 Pkt	76 Pcnt	74 Pcnt
1772626371	14.03 Volt	170 Pkt	70 Pkt	67 Pcnt	74 Pcnt
1772624572	14.03 Volt	180 Pkt	70 Pkt	70 Pcnt	74 Pcnt
1772624571	14.03 Volt	180 Pkt	70 Pkt	70 Pcnt	74 Pcnt
1772622771	14.03 Volt	240 Pkt	70 Pkt	74 Pcnt	74 Pcnt
1772620971	14.03 Volt	260 Pkt	50 Pkt	69 Pcnt	74 Pcnt
1772619171	14.03 Volt	230 Pkt	40 Pkt	62 Pcnt	74 Pcnt
1772617372	14.03 Volt	200 Pkt	80 Pkt	65 Pcnt	74 Pcnt
1772617371	14.03 Volt	200 Pkt	80 Pkt	65 Pcnt	74 Pcnt
1772615571	14.03 Volt	230 Pkt	110 Pkt	76 Pcnt	74 Pcnt
1772613772	14.03 Volt	240 Pkt	110 Pkt	76 Pcnt	74 Pcnt
1772613771	14.03 Volt	240 Pkt	110 Pkt	76 Pcnt	74 Pcnt
1772611990	13.88 Volt	240 Pkt	90 Pkt	71 Pcnt	74 Pcnt
1772610172	14.03 Volt	230 Pkt	90 Pkt	71 Pcnt	74 Pcnt
1772610171	14.03 Volt	230 Pkt	90 Pkt	71 Pcnt	74 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)