ANVIL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ANVIL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1784683419	13.04 Volt	220 Pkt	10 Pkt	86 Pcnt	32 Deg F
1784683119	13.11 Volt	210 Pkt	10 Pkt	85 Pcnt	32 Deg F
1784682819	13.11 Volt	220 Pkt	10 Pkt	84 Pcnt	32 Deg F
1784682519	13.11 Volt	210 Pkt	10 Pkt	84 Pcnt	32 Deg F
1784682219	13.11 Volt	210 Pkt	10 Pkt	84 Pcnt	32 Deg F
1784681919	13.11 Volt	220 Pkt	10 Pkt	84 Pcnt	32 Deg F
1784681619	13.11 Volt	210 Pkt	10 Pkt	82 Pcnt	32 Deg F
1784681319	13.11 Volt	210 Pkt	10 Pkt	81 Pcnt	32 Deg F
1784681019	13.11 Volt	210 Pkt	10 Pkt	80 Pcnt	32 Deg F
1784680719	13.11 Volt	210 Pkt	10 Pkt	80 Pcnt	32 Deg F
1784680419	13.19 Volt	210 Pkt	10 Pkt	79 Pcnt	32 Deg F
1784680119	13.19 Volt	210 Pkt	10 Pkt	77 Pcnt	32 Deg F
1784679819	13.27 Volt	210 Pkt	10 Pkt	75 Pcnt	32 Deg F
1784679519	13.27 Volt	200 Pkt	10 Pkt	75 Pcnt	32 Deg F
1784679219	13.19 Volt	200 Pkt	10 Pkt	74 Pcnt	32 Deg F
1784678919	13.19 Volt	200 Pkt	10 Pkt	73 Pcnt	32 Deg F
1784678619	13.19 Volt	200 Pkt	10 Pkt	71 Pcnt	32 Deg F
1784678319	13.19 Volt	190 Pkt	10 Pkt	70 Pcnt	32 Deg F
1784678019	13.11 Volt	200 Pkt	10 Pkt	72 Pcnt	32 Deg F
1784677719	13.11 Volt	200 Pkt	10 Pkt	71 Pcnt	32 Deg F
1784677419	13.11 Volt	200 Pkt	10 Pkt	70 Pcnt	32 Deg F
1784677119	13.11 Volt	200 Pkt	10 Pkt	71 Pcnt	32 Deg F
1784676819	13.11 Volt	200 Pkt	10 Pkt	73 Pcnt	32 Deg F
1784676519	13.11 Volt	190 Pkt	10 Pkt	74 Pcnt	32 Deg F
1784676219	13.11 Volt	200 Pkt	10 Pkt	76 Pcnt	32 Deg F

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)