N2PYI-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N2PYI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1789984805	0.15 Rx Erlang	0.04 Tx Erlang	124 count/10m	22 count/10m	33 count/10m
1789983605	0.16 Rx Erlang	0.04 Tx Erlang	125 count/10m	18 count/10m	34 count/10m
1789982405	0.15 Rx Erlang	0.04 Tx Erlang	119 count/10m	17 count/10m	35 count/10m
1789981205	0.16 Rx Erlang	0.04 Tx Erlang	137 count/10m	17 count/10m	32 count/10m
1789980005	0.17 Rx Erlang	0.04 Tx Erlang	141 count/10m	17 count/10m	33 count/10m
1789978805	0.18 Rx Erlang	0.08 Tx Erlang	144 count/10m	24 count/10m	48 count/10m
1789977605	0.13 Rx Erlang	0.05 Tx Erlang	116 count/10m	21 count/10m	38 count/10m
1789976405	0.13 Rx Erlang	0.06 Tx Erlang	112 count/10m	15 count/10m	41 count/10m
1789975205	0.13 Rx Erlang	0.06 Tx Erlang	107 count/10m	22 count/10m	46 count/10m
1789974005	0.15 Rx Erlang	0.05 Tx Erlang	116 count/10m	15 count/10m	35 count/10m
1789972805	0.14 Rx Erlang	0.06 Tx Erlang	115 count/10m	16 count/10m	44 count/10m
1789971605	0.17 Rx Erlang	0.07 Tx Erlang	141 count/10m	27 count/10m	44 count/10m
1789970405	0.15 Rx Erlang	0.06 Tx Erlang	106 count/10m	20 count/10m	45 count/10m
1789969205	0.12 Rx Erlang	0.05 Tx Erlang	104 count/10m	21 count/10m	38 count/10m
1789968006	0.15 Rx Erlang	0.05 Tx Erlang	135 count/10m	22 count/10m	43 count/10m
1789966805	0.13 Rx Erlang	0.05 Tx Erlang	102 count/10m	17 count/10m	40 count/10m
1789965605	0.12 Rx Erlang	0.04 Tx Erlang	104 count/10m	11 count/10m	32 count/10m
1789964405	0.13 Rx Erlang	0.04 Tx Erlang	108 count/10m	14 count/10m	34 count/10m
1789963205	0.11 Rx Erlang	0.04 Tx Erlang	90 count/10m	10 count/10m	33 count/10m
1789962006	0.11 Rx Erlang	0.04 Tx Erlang	98 count/10m	8 count/10m	32 count/10m
1789960805	0.11 Rx Erlang	0.05 Tx Erlang	93 count/10m	13 count/10m	34 count/10m
1789959605	0.13 Rx Erlang	0.04 Tx Erlang	101 count/10m	20 count/10m	28 count/10m
1789958405	0.13 Rx Erlang	0.04 Tx Erlang	115 count/10m	20 count/10m	31 count/10m
1789957205	0.16 Rx Erlang	0.04 Tx Erlang	124 count/10m	40 count/10m	35 count/10m
1789956005	0.17 Rx Erlang	0.05 Tx Erlang	138 count/10m	45 count/10m	36 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)