IN3FSB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IN3FSB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1765541633	13.95 Volt	930 Pkt	190 Pkt	75 Pcnt
1765532632	13.95 Volt	1000 Pkt	230 Pkt	75 Pcnt
1765530832	14.03 Volt	1000 Pkt	210 Pkt	75 Pcnt
1765529034	14.03 Volt	1010 Pkt	230 Pkt	77 Pcnt
1765527232	13.95 Volt	890 Pkt	200 Pkt	76 Pcnt
1765523633	14.03 Volt	870 Pkt	190 Pkt	71 Pcnt
1765521833	14.03 Volt	830 Pkt	200 Pkt	70 Pcnt
1765518233	14.03 Volt	910 Pkt	210 Pkt	71 Pcnt
1765516433	14.03 Volt	890 Pkt	190 Pkt	72 Pcnt
1765511033	14.03 Volt	810 Pkt	180 Pkt	73 Pcnt
1765507433	13.95 Volt	840 Pkt	170 Pkt	72 Pcnt
1765505633	14.03 Volt	790 Pkt	170 Pkt	71 Pcnt
1765502033	14.03 Volt	780 Pkt	170 Pkt	73 Pcnt
1765500234	14.03 Volt	800 Pkt	180 Pkt	73 Pcnt
1765494836	14.03 Volt	860 Pkt	200 Pkt	75 Pcnt
1765493034	14.03 Volt	850 Pkt	200 Pkt	74 Pcnt
1765491234	13.95 Volt	810 Pkt	210 Pkt	73 Pcnt
1765489453	14.03 Volt	840 Pkt	220 Pkt	73 Pcnt
1765487634	13.95 Volt	860 Pkt	220 Pkt	72 Pcnt
1765485834	13.95 Volt	890 Pkt	230 Pkt	73 Pcnt
1765473234	13.95 Volt	930 Pkt	190 Pkt	75 Pcnt
1765458835	13.95 Volt	940 Pkt	210 Pkt	74 Pcnt
1765457035	13.95 Volt	880 Pkt	190 Pkt	73 Pcnt
1765455235	13.95 Volt	860 Pkt	180 Pkt	72 Pcnt
1765453435	13.95 Volt	840 Pkt	190 Pkt	72 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)