HP1LDF-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1LDF-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1789940259	14 Pkt	0 Pkt	0 Pkt	-65 dBm	13.97 V
1789939033	11 Pkt	0 Pkt	0 Pkt	-68 dBm	13.97 V
1789937808	3 Pkt	0 Pkt	0 Pkt	-65 dBm	13.95 V
1789937641	11 Pkt	0 Pkt	0 Pkt	31 dBm	13.95 V
1789936410	12 Pkt	9 Pkt	0 Pkt	-69 dBm	13.95 V
1789935185	9 Pkt	1 Pkt	0 Pkt	-68 dBm	13.95 V
1789933960	11 Pkt	0 Pkt	0 Pkt	-65 dBm	13.97 V
1789932734	13 Pkt	0 Pkt	0 Pkt	-67 dBm	13.97 V
1789931510	10 Pkt	1 Pkt	0 Pkt	-69 dBm	13.95 V
1789930284	14 Pkt	0 Pkt	0 Pkt	-68 dBm	13.97 V
1789929059	11 Pkt	0 Pkt	0 Pkt	-66 dBm	13.97 V
1789927834	14 Pkt	8 Pkt	0 Pkt	-65 dBm	12.45 V
1789926609	16 Pkt	0 Pkt	0 Pkt	-66 dBm	13.97 V
1789925383	13 Pkt	1 Pkt	0 Pkt	-65 dBm	13.95 V
1789924158	15 Pkt	10 Pkt	0 Pkt	-65 dBm	13.97 V
1789922932	14 Pkt	0 Pkt	0 Pkt	-64 dBm	13.95 V
1789921707	16 Pkt	0 Pkt	0 Pkt	-64 dBm	13.97 V
1789920482	18 Pkt	1 Pkt	0 Pkt	-66 dBm	13.95 V
1789919257	13 Pkt	0 Pkt	0 Pkt	-68 dBm	13.95 V
1789918031	13 Pkt	12 Pkt	0 Pkt	-65 dBm	13.95 V
1789916808	-	-	-	-	-
1789916806	24 Pkt	2 Pkt	0 Pkt	-68 dBm	13.95 V
1789915581	13 Pkt	0 Pkt	0 Pkt	-66 dBm	13.97 V
1789914356	11 Pkt	0 Pkt	0 Pkt	-65 dBm	13.95 V
1789913131	15 Pkt	1 Pkt	0 Pkt	-65 dBm	13.97 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)