IQ2ZY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ2ZY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1765583244	5 Pkt	10 Pkt	0.6 Pcnt	43 Pcnt
1765582644	1 Pkt	10 Pkt	0.6 Pcnt	43 Pcnt
1765582344	2 Pkt	10 Pkt	0.6 Pcnt	43 Pcnt
1765582044	1 Pkt	10 Pkt	0.6 Pcnt	43 Pcnt
1765581745	1 Pkt	10 Pkt	0.6 Pcnt	43 Pcnt
1765581458	3 Pkt	10 Pkt	0.6 Pcnt	43 Pcnt
1765581144	3 Pkt	30 Pkt	0.6 Pcnt	43 Pcnt
1765580845	2 Pkt	40 Pkt	0.6 Pcnt	43 Pcnt
1765580544	2 Pkt	60 Pkt	0.6 Pcnt	43 Pcnt
1765580245	4 Pkt	60 Pkt	0.6 Pcnt	43 Pcnt
1765579945	3 Pkt	60 Pkt	0.6 Pcnt	43 Pcnt
1765579644	1 Pkt	60 Pkt	0.6 Pcnt	43 Pcnt
1765579345	2 Pkt	60 Pkt	0.6 Pcnt	43 Pcnt
1765579045	2 Pkt	60 Pkt	0.6 Pcnt	43 Pcnt
1765578745	2 Pkt	60 Pkt	0.6 Pcnt	43 Pcnt
1765578445	5 Pkt	60 Pkt	0.6 Pcnt	43 Pcnt
1765578145	18 Pkt	60 Pkt	0.6 Pcnt	43 Pcnt
1765577845	25 Pkt	60 Pkt	0.6 Pcnt	43 Pcnt
1765577545	28 Pkt	40 Pkt	0.6 Pcnt	43 Pcnt
1765577245	25 Pkt	30 Pkt	0.6 Pcnt	43 Pcnt
1765576945	6 Pkt	10 Pkt	0.6 Pcnt	43 Pcnt
1765576668	4 Pkt	10 Pkt	0.6 Pcnt	43 Pcnt
1765576345	2 Pkt	10 Pkt	0.6 Pcnt	43 Pcnt
1765576045	1 Pkt	10 Pkt	0.6 Pcnt	43 Pcnt
1765575745	3 Pkt	10 Pkt	0.6 Pcnt	43 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)