Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object E21TMW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* WiFi* BaudRate*
1788680320 0 Pkt 194 Pkt 0 Pkt 49 dB 19200 bps
1788679720 0 Pkt 210 Pkt 0 Pkt 45 dB 19200 bps
1788679120 0 Pkt 256 Pkt 0 Pkt 50 dB 19200 bps
1788678520 0 Pkt 342 Pkt 0 Pkt 49 dB 19200 bps
1788677900 0 Pkt 160 Pkt 0 Pkt 47 dB 19200 bps
1788677192 0 Pkt 65 Pkt 0 Pkt 51 dB 19200 bps
1788676592 0 Pkt 72 Pkt 0 Pkt 49 dB 19200 bps
1788675995 0 Pkt 57 Pkt 0 Pkt 45 dB 19200 bps
1788675392 0 Pkt 58 Pkt 0 Pkt 48 dB 19200 bps
1788674792 0 Pkt 64 Pkt 0 Pkt 48 dB 19200 bps
1788674192 0 Pkt 44 Pkt 0 Pkt 49 dB 19200 bps
1788673592 0 Pkt 69 Pkt 0 Pkt 47 dB 19200 bps
1788672992 0 Pkt 57 Pkt 0 Pkt 49 dB 19200 bps
1788672392 0 Pkt 53 Pkt 0 Pkt 48 dB 19200 bps
1788671792 0 Pkt 58 Pkt 0 Pkt 51 dB 19200 bps
1788671192 0 Pkt 58 Pkt 0 Pkt 51 dB 19200 bps
1788670592 0 Pkt 44 Pkt 0 Pkt 46 dB 19200 bps
1788669992 0 Pkt 60 Pkt 0 Pkt 52 dB 19200 bps
1788669392 0 Pkt 65 Pkt 0 Pkt 51 dB 19200 bps
1788668792 0 Pkt 44 Pkt 0 Pkt 48 dB 19200 bps
1788668192 0 Pkt 64 Pkt 0 Pkt 47 dB 19200 bps
1788667592 0 Pkt 58 Pkt 0 Pkt 48 dB 19200 bps
1788666992 0 Pkt 53 Pkt 0 Pkt 53 dB 19200 bps
1788666393 0 Pkt 63 Pkt 0 Pkt 54 dB 19200 bps
1788665794 0 Pkt 53 Pkt 0 Pkt 52 dB 19200 bps
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
WiFi: 0, 1, 100
BaudRate: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)