F4ASK-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F4ASK-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	A2*	A3*	A4*	A5*
1776658006	12.9 Volt	0 None	0 None	0 None	0 None
1776656205	12.9 Volt	0 None	0 None	0 None	0 None
1776652606	12.9 Volt	0 None	0 None	0 None	0 None
1776650806	12.9 Volt	0 None	0 None	0 None	0 None
1776649906	12.98 Volt	0 None	0 None	0 None	0 None
1776585108	13.05 Volt	0 None	0 None	0 None	0 None
1776583308	12.9 Volt	0 None	0 None	0 None	0 None
1776576108	12.9 Volt	0 None	0 None	0 None	0 None
1776573409	12.83 Volt	0 None	0 None	0 None	0 None
1776570709	12.9 Volt	0 None	0 None	0 None	0 None
1776568010	12.9 Volt	0 None	0 None	0 None	0 None
1776563511	12.98 Volt	0 None	0 None	0 None	0 None
1776553610	13.05 Volt	0 None	0 None	0 None	0 None
1776504111	13.65 Volt	0 None	0 None	0 None	0 None
1776469923	13.05 Volt	0 None	0 None	0 None	0 None
1776468113	13.05 Volt	0 None	0 None	0 None	0 None
1776465418	13.05 Volt	0 None	0 None	0 None	0 None
1776459113	13.13 Volt	0 None	0 None	0 None	0 None
1776458214	13.13 Volt	0 None	0 None	0 None	0 None
1776456414	13.13 Volt	0 None	0 None	0 None	0 None
1776453714	13.2 Volt	0 None	0 None	0 None	0 None
1776452817	13.13 Volt	0 None	0 None	0 None	0 None
1776450113	13.28 Volt	0 None	0 None	0 None	0 None
1776448313	13.35 Volt	0 None	0 None	0 None	0 None
1776446519	13.43 Volt	0 None	0 None	0 None	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

A2: 0, 0, 0

A3: 0, 0, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)