LZ2KAC-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ2KAC-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1777091456	30 Pkt	0 Pkt	0 Pkt	-70 dBm	14.6 V
1777089646	42 Pkt	0 Pkt	0 Pkt	-70 dBm	14.6 V
1777087836	34 Pkt	1 Pkt	0 Pkt	-70 dBm	14.6 V
1777086026	45 Pkt	1 Pkt	0 Pkt	-70 dBm	14.6 V
1777084216	41 Pkt	1 Pkt	0 Pkt	-69 dBm	14.6 V
1777082406	33 Pkt	3 Pkt	0 Pkt	-70 dBm	14.6 V
1777080596	29 Pkt	0 Pkt	0 Pkt	-70 dBm	14.6 V
1777078786	34 Pkt	1 Pkt	0 Pkt	-70 dBm	14.62 V
1777076976	35 Pkt	5 Pkt	0 Pkt	-70 dBm	14.6 V
1777075166	30 Pkt	2 Pkt	0 Pkt	-70 dBm	14.6 V
1777073356	28 Pkt	1 Pkt	0 Pkt	-70 dBm	14.6 V
1777071546	40 Pkt	0 Pkt	0 Pkt	-70 dBm	14.6 V
1777069736	35 Pkt	1 Pkt	0 Pkt	-70 dBm	14.6 V
1777067926	38 Pkt	0 Pkt	0 Pkt	-70 dBm	14.6 V
1777066116	35 Pkt	1 Pkt	0 Pkt	-68 dBm	14.6 V
1777064306	27 Pkt	2 Pkt	1 Pkt	-72 dBm	14.62 V
1777062496	28 Pkt	1 Pkt	0 Pkt	-70 dBm	14.62 V
1777060686	30 Pkt	1 Pkt	0 Pkt	-70 dBm	14.6 V
1777058876	38 Pkt	0 Pkt	0 Pkt	-70 dBm	14.62 V
1777057066	27 Pkt	0 Pkt	0 Pkt	-71 dBm	14.6 V
1777055256	31 Pkt	0 Pkt	0 Pkt	-70 dBm	14.6 V
1777053446	34 Pkt	0 Pkt	0 Pkt	-70 dBm	14.62 V
1777051636	27 Pkt	0 Pkt	0 Pkt	-70 dBm	14.6 V
1777049825	34 Pkt	1 Pkt	0 Pkt	-71 dBm	14.6 V
1777048015	34 Pkt	0 Pkt	0 Pkt	-70 dBm	14.6 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)