WC4PEM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Rx1h*	Eff1h*
1788573639	20.5 C	14.1 Volt	1130 Pkt	82 Pcnt
1788573037	20.5 C	14.03 Volt	1140 Pkt	83 Pcnt
1788573037	20.5 C	14.03 Volt	1140 Pkt	83 Pcnt
1788572457	21 C	14.1 Volt	1130 Pkt	83 Pcnt
1788572457	21 C	14.1 Volt	1130 Pkt	83 Pcnt
1788571838	20.5 C	14.03 Volt	1110 Pkt	83 Pcnt
1788571837	20.5 C	14.03 Volt	1110 Pkt	83 Pcnt
1788571237	20.5 C	14.1 Volt	1110 Pkt	82 Pcnt
1788571237	20.5 C	14.1 Volt	1110 Pkt	82 Pcnt
1788570637	20.5 C	14.1 Volt	1080 Pkt	81 Pcnt
1788570637	20.5 C	14.1 Volt	1080 Pkt	81 Pcnt
1788570038	21 C	14.1 Volt	1080 Pkt	81 Pcnt
1788570037	21 C	14.1 Volt	1080 Pkt	81 Pcnt
1788569437	21 C	14.1 Volt	1070 Pkt	80 Pcnt
1788569437	21 C	14.1 Volt	1070 Pkt	80 Pcnt
1788568854	20.5 C	14.03 Volt	1060 Pkt	79 Pcnt
1788568854	20.5 C	14.03 Volt	1060 Pkt	79 Pcnt
1788568237	20.5 C	14.1 Volt	1070 Pkt	79 Pcnt
1788568237	20.5 C	14.1 Volt	1070 Pkt	79 Pcnt
1788567637	20.5 C	14.1 Volt	1080 Pkt	79 Pcnt
1788567637	20.5 C	14.1 Volt	1080 Pkt	79 Pcnt
1788567037	21 C	14.1 Volt	1090 Pkt	78 Pcnt
1788567037	21 C	14.1 Volt	1090 Pkt	78 Pcnt
1788566440	21 C	14.1 Volt	1080 Pkt	78 Pcnt
1788566437	21 C	14.1 Volt	1080 Pkt	78 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)