VK2GJ-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Vsol*	Psys*	Temp*	AirP*
1773143061	3.67 V	0.36 V	176 mW	27.8 degC	99825 Pa
1773142639	3.75 V	0.34 V	148 mW	27.3 degC	99825 Pa
1773142241	3.82 V	0.36 V	140 mW	27.3 degC	99825 Pa
1773141926	3.76 V	0.36 V	170 mW	27.7 degC	99825 Pa
1773141552	3.77 V	0.36 V	156 mW	27.6 degC	99837.5 Pa
1773141225	3.94 V	0.34 V	170 mW	27.6 degC	99837.5 Pa
1773140824	3.83 V	0.36 V	162 mW	27.2 degC	99825 Pa
1773140479	3.75 V	0.36 V	156 mW	27.2 degC	99825 Pa
1773140103	3.82 V	0.36 V	148 mW	27.1 degC	99825 Pa
1773139714	3.79 V	0.36 V	140 mW	27 degC	99825 Pa
1773139407	3.54 V	0.36 V	132 mW	27 degC	99825 Pa
1773139025	3.75 V	0.36 V	150 mW	27.2 degC	99825 Pa
1773138677	3.7 V	0.36 V	158 mW	27.3 degC	99812.5 Pa
1773137919	3.7 V	0.36 V	132 mW	27.1 degC	99812.5 Pa
1773137573	3.91 V	0.36 V	144 mW	27.2 degC	99812.5 Pa
1773136480	3.75 V	0.39 V	136 mW	27.1 degC	99800 Pa
1773136118	3.73 V	0.38 V	144 mW	27.2 degC	99800 Pa
1773135766	3.93 V	0.38 V	142 mW	27.2 degC	99787.5 Pa
1773135433	3.94 V	0.38 V	140 mW	27.2 degC	99787.5 Pa
1773135065	3.82 V	0.36 V	142 mW	27.4 degC	99787.5 Pa
1773134716	3.73 V	0.36 V	150 mW	27.6 degC	99775 Pa
1773134345	3.81 V	0.36 V	152 mW	27.7 degC	99762.5 Pa
1773134035	3.69 V	0.35 V	158 mW	27.9 degC	99737.5 Pa
1773133647	3.75 V	0.35 V	144 mW	27.7 degC	99750 Pa
1773133265	3.81 V	0.35 V	152 mW	27.6 degC	99737.5 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Psys: 0, 2, 0

Temp: 0, 0.1, -100

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)