PD2AVE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PD2AVE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1757477025	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757476725	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757476425	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757476125	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757475825	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757475525	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757475225	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757474925	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757474625	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757474325	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757474025	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757473725	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757473425	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757473125	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757472825	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757472525	11.03 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757472225	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757471925	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757471625	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757471325	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757471025	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757470725	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757470425	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757470125	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757469825	10.95 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)