N0SZ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N0SZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1780583615	12.3 Volt	90 Pkt	40 Pkt	19 Pcnt
1780583315	12.3 Volt	80 Pkt	40 Pkt	18 Pcnt
1780583015	12.3 Volt	90 Pkt	40 Pkt	19 Pcnt
1780582715	12.3 Volt	90 Pkt	40 Pkt	19 Pcnt
1780582415	12.3 Volt	90 Pkt	40 Pkt	20 Pcnt
1780582115	12.3 Volt	90 Pkt	40 Pkt	21 Pcnt
1780581815	12.3 Volt	90 Pkt	40 Pkt	21 Pcnt
1780581515	12.3 Volt	100 Pkt	40 Pkt	21 Pcnt
1780581215	12.3 Volt	90 Pkt	40 Pkt	20 Pcnt
1780580915	12.3 Volt	90 Pkt	40 Pkt	20 Pcnt
1780580615	12.3 Volt	90 Pkt	40 Pkt	20 Pcnt
1780580316	12.3 Volt	80 Pkt	40 Pkt	19 Pcnt
1780580015	12.3 Volt	80 Pkt	40 Pkt	19 Pcnt
1780579715	12.3 Volt	90 Pkt	40 Pkt	20 Pcnt
1780579415	12.3 Volt	90 Pkt	40 Pkt	20 Pcnt
1780579115	11.93 Volt	90 Pkt	40 Pkt	19 Pcnt
1780578815	12.3 Volt	90 Pkt	40 Pkt	19 Pcnt
1780578515	12.3 Volt	90 Pkt	40 Pkt	19 Pcnt
1780578215	12.3 Volt	80 Pkt	30 Pkt	19 Pcnt
1780577915	12.3 Volt	80 Pkt	30 Pkt	19 Pcnt
1780577615	12.3 Volt	80 Pkt	30 Pkt	20 Pcnt
1780577315	12.3 Volt	80 Pkt	30 Pkt	20 Pcnt
1780577015	12.3 Volt	80 Pkt	30 Pkt	19 Pcnt
1780576715	12.3 Volt	80 Pkt	30 Pkt	19 Pcnt
1780576415	12.3 Volt	70 Pkt	20 Pkt	19 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)