OE6POD-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE6POD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1780595668	931.9 hPa	24.4 C deg	1007.2 hPa	0 C deg
1780593853	931.9 hPa	27.2 C deg	1006.5 hPa	0 C deg
1780592038	931.8 hPa	28.7 C deg	1006.1 hPa	0 C deg
1780590223	931.9 hPa	30.2 C deg	1005.8 hPa	0 C deg
1780588408	931.9 hPa	31.2 C deg	1005.5 hPa	0 C deg
1780586593	932.2 hPa	30.7 C deg	1005.9 hPa	0 C deg
1780584778	932.3 hPa	31.8 C deg	1005.8 hPa	0 C deg
1780582963	932.5 hPa	32.6 C deg	1005.8 hPa	0 C deg
1780581148	932.4 hPa	34.3 C deg	1005.3 hPa	0 C deg
1780579333	932.7 hPa	34.4 C deg	1005.5 hPa	0 C deg
1780577518	932.9 hPa	36.7 C deg	1005.3 hPa	0 C deg
1780575703	933 hPa	35.8 C deg	1005.6 hPa	0 C deg
1780573888	933.5 hPa	33.9 C deg	1006.6 hPa	0 C deg
1780572072	933.7 hPa	31.6 C deg	1007.4 hPa	0 C deg
1780570257	934.3 hPa	32.3 C deg	1007.8 hPa	0 C deg
1780568443	934.6 hPa	33.1 C deg	1008 hPa	0 C deg
1780566627	935 hPa	32.7 C deg	1008.5 hPa	0 C deg
1780564813	935.4 hPa	34.8 C deg	1008.4 hPa	0 C deg
1780562997	935.5 hPa	37.6 C deg	1007.8 hPa	0 C deg
1780561751	935.6 hPa	38.8 C deg	1007.7 hPa	0 C deg
1780561726	935.6 hPa	38.8 C deg	1007.7 hPa	0 C deg
1780561644	935.6 hPa	38.8 C deg	1007.7 hPa	0 C deg
1780561630	935.6 hPa	38.8 C deg	1007.7 hPa	0 C deg
1780561592	935.6 hPa	38.8 C deg	1007.7 hPa	0 C deg
1780561564	935.6 hPa	38.8 C deg	1007.7 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)