TA3D Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3D. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1784693323	40 Pkt	7 Pkt	9 Pkt	-74 dBm	13.08 V
1784692391	36 Pkt	6 Pkt	11 Pkt	-74 dBm	13.08 V
1784691462	37 Pkt	0 Pkt	15 Pkt	-73 dBm	13.08 V
1784690538	39 Pkt	4 Pkt	12 Pkt	-76 dBm	13.08 V
1784689610	3 Pkt	1 Pkt	1 Pkt	-74 dBm	13.08 V
1784688895	38 Pkt	24 Pkt	4 Pkt	-75 dBm	13.08 V
1784687947	35 Pkt	16 Pkt	3 Pkt	-74 dBm	13.08 V
1784687008	39 Pkt	18 Pkt	8 Pkt	-74 dBm	13.08 V
1784686066	37 Pkt	15 Pkt	3 Pkt	-74 dBm	13.08 V
1784685129	37 Pkt	16 Pkt	1 Pkt	-72 dBm	13.08 V
1784684187	40 Pkt	11 Pkt	0 Pkt	-75 dBm	13.08 V
1784683250	42 Pkt	14 Pkt	5 Pkt	-74 dBm	13.08 V
1784682313	41 Pkt	15 Pkt	3 Pkt	-75 dBm	13.08 V
1784681391	47 Pkt	12 Pkt	6 Pkt	-74 dBm	13.08 V
1784680437	35 Pkt	13 Pkt	1 Pkt	-74 dBm	13.08 V
1784679499	50 Pkt	11 Pkt	9 Pkt	-76 dBm	13.08 V
1784678564	45 Pkt	16 Pkt	8 Pkt	-77 dBm	13.08 V
1784677623	41 Pkt	16 Pkt	12 Pkt	-74 dBm	13.08 V
1784676684	41 Pkt	11 Pkt	10 Pkt	-75 dBm	13.08 V
1784675751	40 Pkt	4 Pkt	11 Pkt	-75 dBm	13.08 V
1784674824	42 Pkt	4 Pkt	14 Pkt	-76 dBm	13.08 V
1784673896	5 Pkt	0 Pkt	0 Pkt	-72 dBm	13.08 V
1784673255	36 Pkt	6 Pkt	18 Pkt	-75 dBm	13.08 V
1784672326	30 Pkt	8 Pkt	14 Pkt	-77 dBm	13.08 V
1784671395	9 Pkt	0 Pkt	1 Pkt	-75 dBm	13.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)