HS6KLJ-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6KLJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RF->INET*	INET->RF*	Repeater*	AllCount*	AllDrop*
1780585786	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1780571177	0 Pkts	0 Pkts	0 Pkts	19 Pkts	0 Pkts
1780570577	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1780508321	0 Pkts	0 Pkts	0 Pkts	1 Pkts	0 Pkts
1780493681	0 Pkts	0 Pkts	0 Pkts	15 Pkts	0 Pkts
1780493081	0 Pkts	0 Pkts	0 Pkts	12 Pkts	0 Pkts
1780492481	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1780059374	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1780054448	0 Pkts	0 Pkts	0 Pkts	25 Pkts	0 Pkts
1780053851	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1780048417	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1780047817	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1780015283	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1780014084	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1780012283	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1780011449	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1779965180	0 Pkts	0 Pkts	0 Pkts	2 Pkts	0 Pkts
1779964583	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1779963383	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1779930487	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1779929887	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1779928088	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1779926662	0 Pkts	0 Pkts	0 Pkts	0 Pkts	0 Pkts
1779895005	0 Pkts	0 Pkts	0 Pkts	1 Pkts	0 Pkts
1779880156	0 Pkts	0 Pkts	0 Pkts	5 Pkts	0 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)