OK0DJ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK0DJ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784676861	14.03 Volt	840 Pkt	250 Pkt	60 Pcnt
1784676860	14.03 Volt	840 Pkt	250 Pkt	60 Pcnt
1784676260	14.03 Volt	820 Pkt	240 Pkt	59 Pcnt
1784675660	14.03 Volt	820 Pkt	250 Pkt	59 Pcnt
1784675061	14.03 Volt	810 Pkt	240 Pkt	61 Pcnt
1784675060	14.03 Volt	810 Pkt	240 Pkt	61 Pcnt
1784674460	14.03 Volt	840 Pkt	240 Pkt	62 Pcnt
1784673860	14.03 Volt	860 Pkt	240 Pkt	63 Pcnt
1784673261	14.03 Volt	840 Pkt	240 Pkt	62 Pcnt
1784673260	14.03 Volt	840 Pkt	240 Pkt	62 Pcnt
1784672660	14.03 Volt	850 Pkt	250 Pkt	63 Pcnt
1784672060	14.03 Volt	850 Pkt	240 Pkt	63 Pcnt
1784671462	14.03 Volt	840 Pkt	250 Pkt	62 Pcnt
1784671460	14.03 Volt	840 Pkt	250 Pkt	62 Pcnt
1784670860	14.03 Volt	860 Pkt	250 Pkt	63 Pcnt
1784670260	14.03 Volt	840 Pkt	240 Pkt	62 Pcnt
1784669662	14.03 Volt	870 Pkt	240 Pkt	64 Pcnt
1784669660	14.03 Volt	870 Pkt	240 Pkt	64 Pcnt
1784669060	14.03 Volt	870 Pkt	240 Pkt	63 Pcnt
1784668460	14.03 Volt	860 Pkt	240 Pkt	62 Pcnt
1784667861	14.03 Volt	890 Pkt	240 Pkt	62 Pcnt
1784667860	14.03 Volt	890 Pkt	240 Pkt	62 Pcnt
1784667260	14.03 Volt	870 Pkt	230 Pkt	60 Pcnt
1784666660	14.03 Volt	880 Pkt	240 Pkt	61 Pcnt
1784666061	14.03 Volt	840 Pkt	250 Pkt	59 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)