IR5AO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR5AO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1780590743	12.01 Volt	780 Pkt	170 Pkt	94 Pcnt	93 Pcnt
1780590742	12.01 Volt	780 Pkt	170 Pkt	94 Pcnt	93 Pcnt
1780590143	12.01 Volt	760 Pkt	170 Pkt	92 Pcnt	93 Pcnt
1780590142	12.01 Volt	760 Pkt	170 Pkt	92 Pcnt	93 Pcnt
1780589546	11.69 Volt	760 Pkt	180 Pkt	91 Pcnt	93 Pcnt
1780589542	11.69 Volt	760 Pkt	180 Pkt	91 Pcnt	93 Pcnt
1780588942	11.61 Volt	770 Pkt	180 Pkt	90 Pcnt	93 Pcnt
1780588342	12.01 Volt	790 Pkt	200 Pkt	89 Pcnt	93 Pcnt
1780587742	12.01 Volt	770 Pkt	190 Pkt	89 Pcnt	93 Pcnt
1780587742	12.01 Volt	770 Pkt	190 Pkt	89 Pcnt	93 Pcnt
1780587148	12.01 Volt	760 Pkt	190 Pkt	88 Pcnt	93 Pcnt
1780587142	12.01 Volt	760 Pkt	190 Pkt	88 Pcnt	93 Pcnt
1780586542	12.01 Volt	770 Pkt	190 Pkt	89 Pcnt	93 Pcnt
1780585943	12.01 Volt	760 Pkt	190 Pkt	90 Pcnt	93 Pcnt
1780585942	12.01 Volt	760 Pkt	190 Pkt	90 Pcnt	93 Pcnt
1780585347	12.01 Volt	750 Pkt	200 Pkt	90 Pcnt	93 Pcnt
1780585342	12.01 Volt	750 Pkt	200 Pkt	90 Pcnt	93 Pcnt
1780584742	12.01 Volt	690 Pkt	170 Pkt	90 Pcnt	93 Pcnt
1780584742	12.01 Volt	690 Pkt	170 Pkt	90 Pcnt	93 Pcnt
1780584143	12.01 Volt	680 Pkt	170 Pkt	91 Pcnt	93 Pcnt
1780584142	12.01 Volt	680 Pkt	170 Pkt	91 Pcnt	93 Pcnt
1780583542	12.01 Volt	680 Pkt	170 Pkt	93 Pcnt	93 Pcnt
1780582942	12.01 Volt	650 Pkt	170 Pkt	94 Pcnt	94 Pcnt
1780582342	12.01 Volt	630 Pkt	160 Pkt	93 Pcnt	93 Pcnt
1780581742	12.01 Volt	550 Pkt	140 Pkt	94 Pcnt	94 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)