YO2LYN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO2LYN-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Vbat*	Ibat*	Isolar*	Temp*
1761540731	12.32 V	12.5 V	-1.37 A	0.01 A	2 C
1761540432	12.32 V	12.5 V	-1.37 A	0.01 A	2 C
1761540432	12.32 V	12.5 V	-1.37 A	0.01 A	2 C
1761539832	12.32 V	12.5 V	-1.37 A	0.01 A	2 C
1761539831	12.32 V	12.5 V	-1.37 A	0.01 A	2 C
1761539531	12.32 V	12.5 V	-1.37 A	0.01 A	2 C
1761539232	12.32 V	12.5 V	-1.37 A	0.01 A	2 C
1761539232	12.32 V	12.5 V	-1.37 A	0.01 A	2 C
1761538931	12.39 V	12.5 V	-1.37 A	0.01 A	2 C
1761538632	12.32 V	12.5 V	-1.37 A	0.01 A	2 C
1761538632	12.32 V	12.5 V	-1.37 A	0.01 A	2 C
1761538332	12.39 V	12.5 V	-1.37 A	0.01 A	2 C
1761538032	12.39 V	12.5 V	-1.37 A	0.01 A	2.5 C
1761538031	12.39 V	12.5 V	-1.37 A	0.01 A	2.5 C
1761537432	12.39 V	12.5 V	-1.37 A	0.01 A	2.5 C
1761537431	12.39 V	12.5 V	-1.37 A	0.01 A	2.5 C
1761537131	12.39 V	12.5 V	-1.56 A	0.01 A	2.5 C
1761536832	12.39 V	12.5 V	-1.37 A	0.01 A	2.5 C
1761536831	12.39 V	12.5 V	-1.37 A	0.01 A	2.5 C
1761536232	12.39 V	12.5 V	-1.37 A	0.01 A	2.5 C
1761535632	12.39 V	12.5 V	-1.37 A	0.01 A	2.5 C
1761535048	12.39 V	12.6 V	-1.37 A	0.01 A	2.5 C
1761535032	12.39 V	12.6 V	-1.37 A	0.01 A	2.5 C
1761533832	12.39 V	12.6 V	-1.37 A	0.01 A	3 C
1761533232	12.39 V	12.6 V	-1.37 A	0.01 A	3 C

*Used Equation Coefficients:

Vin: 0, 0.0765, 0

Vbat: 0, 0.1, 0

Ibat: 0, 0.1953, -24.9984

Isolar: 0, 0.1953, -24.9884

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)