VE7RCK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7RCK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1789954850	13.8 Volt	170 Pkt	140 Pkt	60 Pcnt	22.5 C
1789954250	13.8 Volt	160 Pkt	120 Pkt	54 Pcnt	23 C
1789953650	13.8 Volt	150 Pkt	110 Pkt	53 Pcnt	23 C
1789953050	13.8 Volt	140 Pkt	80 Pkt	47 Pcnt	23.5 C
1789952450	13.8 Volt	140 Pkt	70 Pkt	45 Pcnt	23.5 C
1789951850	13.8 Volt	170 Pkt	70 Pkt	47 Pcnt	23.5 C
1789951250	13.8 Volt	200 Pkt	80 Pkt	49 Pcnt	23.5 C
1789950650	13.8 Volt	220 Pkt	90 Pkt	51 Pcnt	24 C
1789950050	13.8 Volt	230 Pkt	110 Pkt	50 Pcnt	24 C
1789949453	13.8 Volt	240 Pkt	130 Pkt	51 Pcnt	24 C
1789948850	13.8 Volt	230 Pkt	120 Pkt	48 Pcnt	24.5 C
1789948250	13.8 Volt	230 Pkt	130 Pkt	49 Pcnt	24.5 C
1789947650	13.65 Volt	230 Pkt	140 Pkt	50 Pcnt	24.5 C
1789947050	13.8 Volt	240 Pkt	150 Pkt	50 Pcnt	25 C
1789946450	13.65 Volt	240 Pkt	140 Pkt	48 Pcnt	25 C
1789945850	13.8 Volt	220 Pkt	130 Pkt	49 Pcnt	25 C
1789945250	13.8 Volt	240 Pkt	140 Pkt	48 Pcnt	25 C
1789944650	13.65 Volt	210 Pkt	120 Pkt	43 Pcnt	25.5 C
1789944091	13.73 Volt	210 Pkt	120 Pkt	41 Pcnt	25.5 C
1789943450	13.73 Volt	200 Pkt	120 Pkt	41 Pcnt	25.5 C
1789942850	13.58 Volt	230 Pkt	130 Pkt	43 Pcnt	25.5 C
1789942250	13.73 Volt	240 Pkt	140 Pkt	44 Pcnt	25.5 C
1789941650	13.73 Volt	230 Pkt	130 Pkt	44 Pcnt	25.5 C
1789941050	13.73 Volt	230 Pkt	130 Pkt	46 Pcnt	25.5 C
1789940450	13.73 Volt	240 Pkt	130 Pkt	47 Pcnt	25 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)