This is the latest recevied telemetry packets stored in our database for station/object KG4AFQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
RFIn*
RFiGate*
DigiRpt*
Temp*
InetiGate*
1774692934
152 Pkts
135 Pkts
72 Pkts
52 C
0 Pkts
1774689334
164 Pkts
150 Pkts
72 Pkts
52 C
0 Pkts
1774678534
139 Pkts
131 Pkts
62 Pkts
52 C
0 Pkts
1774674934
145 Pkts
135 Pkts
64 Pkts
52 C
0 Pkts
1774671334
165 Pkts
156 Pkts
70 Pkts
52 C
0 Pkts
1774667734
137 Pkts
130 Pkts
59 Pkts
52 C
0 Pkts
1774664134
134 Pkts
125 Pkts
53 Pkts
53 C
0 Pkts
1774660534
152 Pkts
144 Pkts
60 Pkts
54 C
0 Pkts
1774656934
146 Pkts
139 Pkts
58 Pkts
54 C
0 Pkts
*Used Equation Coefficients:
RFIn: 0, 1, 0
RFiGate: 0, 1, 0
DigiRpt: 0, 1, 0
Temp: 0, 1, 0
InetiGate: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)